Measuring Volumes - Powerfix KH 3236 Operating Instructions Manual

Multi-measurement detector
Table of Contents

Advertisement

Available languages

Available languages

3.
Press the button READ
the measured length appears and „W" (Width) starts to flash.
4.
Press the button READ
ars on the upper line and the result of the area calculation in the lower line.
Adding areas together
1.
Measure an area as described in the section „Measuring areas".
2.
Press the button M
The area measured is now saved.
3.
Press the button MODE
measurement.
4.
Measure the next area.
5.
Press the button +/=
6.
Press the button RM
lower line.
7.
Press the button +/=
the result is shown in the lower line.
8.
Repeat the steps 2 to 7 to add in further measurement values.
9.
When you wish to leave the addition mode, press the button MODE
All values are erased.

Measuring volumes

1.
Slide the function switch
The display
2
2.
Press the button MODE
3.
Press the button READ
measured length appears and „W" (Width) starts to flash.
4.
Press the button READ
measured width appears and „H" (Height) starts to flash.
5.
Press the button READ
in the upper line. In the lower line appears the result of the volume calculation.
Adding volumes together
1.
Measure a volume as described in the section „Measuring volumes".
2.
Press the button M
The volume measured is now saved.
3.
Press the button MODE
measurement.
4.
Measure the next volume.
5.
Press the button +/=
6.
Press the button RM
lower line.
6
, to measure the length. In the upper line
6
to measure the width. The measured width appe-
7
. „M+" appears in the display
4
. The appliance is now ready for the second
r
. A „+" appears in the display
w
. The result of the first measurement is shown in the
r
. Both measurements are added together and
q
to „Distance".
switches itself on.
4
twice. In the display
6
, to measure the length. In the upper line the
6
to measure the width. In the upper line the
6
to measure the height. The measured height appears
7
. „M+" appears in the display
4
. The appliance is now ready for the second
r
. A „+" appears in the display
w
. The result of the first measurement is shown in the
2
flashes „L" (Length).
- 7 -
2
.
2
.
4
2
.
2
.
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents