Motorola VC6000 Series Quick Reference Manual page 14

12
Mounting
The following mount examples should be used for installing the VC6000
series inside the vehicle. For optional mounting instructions, refer to the
documentation provided by the mount manufacturer. Recommended
mount manufacturer: RAM Mounts.
WARNING
CAUTION
Free-standing Pedestal Mount
The mount allows the VC6000
series to be easily readjusted to
either the driver or passenger
sides in the most comfortable
location. A single adjustment knob
enables simultaneous adjustment
of both upper and lower ball joints.
The mount affixes to the VC6000
series using the M4 screws, spring
and flat washers and bushings
included inside the Hardware kit,
and to the vehicle's dashboard
using self tapping screws or bolts,
provided by the mount
manufacturer.
Vehicles equipped with air bags - An air bag inflates
!
with great force. DO NOT install the VC6000 series or
place objects, including other communication
equipment, in the area over the air bag or in the air bag
deployment area. If the communication equipment is
improperly installed and the air bag inflates, this could
cause serious injury.
The VC6000 series are supplied with four M6 stainless
screws with flat and lock washers and a ground screw.
Do not use non-metric screws to avoid damaging the
screw threads resulting in housing damage.
VC6000 Series Vehicle Computers
Adjustment Knob
(x4)
RAM-246U