Philips 42PF9731D User Manual page 10

2504.4 en
EN
Please select your
language.....
PHILIPS
using cursor up and
down
PHILIPS Installation
This will help you to install the following
sections:
Television
Settings assistant
Previous
PHILIPS Television
System searching: please wait..........
Digital channels found
Analogue channels found
Stop
10
Downloaded From TV-Manual.com Manuals
13-12-2006 08:29 Pagina 10
First time installation (Continued)
a
Menu language
English
Español
Français
Hrvatski
Italiano
Magyar
.............
Next
Next Skip Stop
16
22
Step 1: select your on-screen language
After the Welcome screen you are asked to select a language of
the TV's on-screen menus.The text of the header and the info
on screen continuously change language. Also the digital audio
and subtitle language will be set to the selected menu language.
1. Press the cursor up/down to highlight your language.
2. Press the key on the remote control.
OK
3. Follow the instructions on screen to proceed.
Step 2: complete the initial TV installation
procedure
1. Press the green colour key on your remote control when
Television is highlighted.
2. Select the country where you are now located.
Notes:
- if you select a wrong country, the channel numbering will
not be according to the standard for your country.
- in case the country selected is not DVB-T supported by
your TV, digital related menu-items will not be
accessible.
3. Press the green colour key on your remote control to start
the Automatic channel installation.
> All available digital TV and radio channels and analogue
TV channels are searched for and stored automatically.
This will take a few minutes.When the search is
complete, the menu will indicate the number of digital
and analogue channels found.
Notes:
- reception of digital terrestrial TV channels is applicable
dependent on the country selected;
- if you choose to install the channels at a later time, select
the Automatic installation in the TV menu, Installation,
Channels to scan available channels.
4. Press the red colour key again when the search is
completed.