GE Refrigerator Owners And Installation Manual page 5

About the temperature controls.
The unit will have one of the temperature controls shown below:
Actual Temp
Control
The temperature controls are preset in the factory 3/-18ºC for Actual Temp Controls in the refrigerator and freezer
compartments respectively.
To adjust the Actual Temp temperature, first press the Freezer
buttons (or the or ) to increase or decrease temperature to the desired setting. Repeat for the other compartment.
Several adjustments may be required. Each time you adjust controls, allow 24 hours after each adjustment for the
refrigerator to reach the setting you have selected.
Control settings will vary based on personal preferences, usage and operating conditions and may require more
than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed
during installation, remove it now.
Ambient temperature limits
This refrigerator is designed to operate in ambient temperatures specified by its Temperature Class, which is marked on
the rating plate.
Temperature Symbol
Class
Extended-
Temperate SN
Temperate N
Subtropical ST
Tropical T
NOTE: Internal temperature may be affected by such factors as the location of the refrigerator, ambient temperature
and frequency of door openings. Adjust temperature controls as required to compensate for these factors.
Ambient Temperature
Maximum Minimum
32°C 10°C
32°C 16°C
38°C 16°C
43°C 16°C
or Refrigerator button. Then press the or
5