Placement; Installing / Removing Brush Heads - Balance KH 107 Operating Instructions Manual

Placement

The charging station
In moist rooms, especially in the vicinity of water (bath), the charging station
must be firmly fixed to the wall, to protect it from falling into water:
• Pull the wall fixture
.
• Provide for the correct assembly of the wall fixture
socket. For this, use the plugs and screws supplied for this purpose.
• Subsequently, place the wall fixture
holder back together. Ensure that the power cable runs laterally
through the recesses of the wall fixture
may not become jammed!

Installing / removing brush heads

Turn the brush head
To install the brush head
The brush head
ads, to avoid damage to the appliance.
(For replacement brush heads, see the order form)
may only be operated free-standing in dry rooms.
downwards from underneath the charging station
clockwise and remove it upwards.
, apply the opposite procedure.
must click in on installation. Only use original brush he-
- 6 -
close to a power
, charging station
and the charging station
and brush
. It