Recording From The Radio; Dubbing From Tape To Tape; Erasing Recorded Tapes - Sharp CD-DP900H Operation Manual

Mini component system
Hide thumbs Also See for CD-DP900H:
Table of Contents

Advertisement

 Recording from the radio

1
Tune in to the desired station. (See page 16.)
2
Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3
Press the REC PAUSE (
Recording will be paused.
4
Press the
start recording.
To interrupt recording:
Press the REC PAUSE (
To resume recording, press the
To stop recording:
Press the
(TAPE ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
Erase-prevention tab of cassette tapes:

When recording on a cassette tape, make
sure that the erase-prevention tabs are not re-
moved. Cassettes have removable tabs that
prevent accidental recording or erasing.

To protect the recorded sound, remove the tab
after recording. Cover the tab hole with adhe-
sive tape to record on the tape without the tab.
Downloaded From Disc-Player.com Sharp Manuals
) button.
/
(TAPE 2
) button to
) button.
/
(TAPE 2
) button.
Tab for side B

 Dubbing from tape to tape

You can record from TAPE 1 to TAPE 2.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette into the
TAPE 1 cassette compartment. Insert
a blank tape into the TAPE 2 cassette
compartment.
It is recommended that the recording tape is
the same length as the master tape.
3
Press the TAPE (1
"TAPE 1" appears on the display.
4
Press the REC PAUSE (
Recording will be paused.
5
Press the
/
(TAPE 2
start dubbing.
To stop dubbing:
Side A
Press the
(TAPE ) button.
TAPE 1 and TAPE 2 will simultaneously stop.

 Erasing recorded tapes

Tab for side A
1
Load the tape to be erased into the TAPE 2 cassette compartment with the side to
be erased facing toward you.
2
Press the TAPE (1
3
Press the REC PAUSE (
4
Press the
/
(TAPE 2
Note:
Make sure that the TAPE 1 is not in use.
2) button until
) button.
) button to
2) button until "TAPE 2" appears on the display.
) button.
) button to start erasing.
Tuning (See page 16.)
02/1/9
CD-DP900H(H)_2.fm
CD-DP900H
ENGLISH
1
2
3
4
5
6
7
8
E-20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-dp900hGboxs0091awm1Gboxs0092awm1

Table of Contents