Adjusting The Monitor; Turning On The Monitor - HP ProDisplay P17A LED Backlit User Manual

Adjusting the Monitor

Tilt the monitor's panel forward or backward to set it to a comfortable eye level.

Turning on the Monitor

1. Press the power button on the computer to turn it on.
2. Press the power button on the front of the monitor to turn it on.
CAUTION:
screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you
should always activate a screen saver application or turn off the monitor when it is not in use for a
prolonged period of time. Image retention is a condition that may occur on all LCD screens. Monitors
with a "burned-in image" are not covered under the HP warranty.
* A prolonged period of time is 12 consecutive hours of non-use.
NOTE: If pressing the power button has no effect, the Power Button Lockout feature may be
enabled. To disable this feature, press and hold the monitor power button for 10 seconds.
NOTE: You can disable the power LED in the OSD menu. Press the
monitor, then select Management > Bezel Power LED > Off.
6 Chapter 2 Setting Up the Monitor
Burn-in image damage may occur on monitors that display the same static image on
Menu button on the front of the