Connecting To A Camcorder; Connecting The Bnc To Bnc Cable - Samsung SyncMaster 650MP User Manual

Connecting to a Camcorder

1.
2.
3.
4.
The audio-video cables shown here are usually included with a Camcorder. (If not, check
your local electronics store.) If your camcorder is stereo, you need to connect a set of two
cables.

Connecting the BNC to BNC cable

1.
Downloaded From TV-Manual.com Manuals
Locate the AV output jacks on the camcorder. They are usually found on the side or back
of the camcorder. Connect a set of audio cables between the AUDIO OUTPUT jacks on
the camcorder and the [AV/COMPONENT AUDIO IN [R-AUDIO-L]] on the LCD Display .
Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the [AV
IN [VIDEO]] on the LCD Display .
Select AV for the Camcorder connection using the SOURCE button on the front of the
LCD Display or on the remote control.
Then, start the Camcorder with a tape inserted.
Note
Connect the [BNC/COMPONENT IN [R/Y, G/P
port on the external device using the BNC to BNC cable.
Connections
, B/P ]] ports on the monitor to the BNC
B R
21