Snooze Function; Projection; Background Lighting For The Display And Projection; Cleaning - E-Bench KH 2001 Operating Instructions Manual

IB_KH2201_02_AR909_UK_4.qxd

Snooze Function

Pressing the SNOOZE
After these 8 minutes, the alarm tone is repeated. Place the switch
On/Off to "OFF" to completely switch off the alarm function.

Projection

Attention! When used properly, the radiation from the projection of the display is
not at all dangerous! However, avoid looking directly into the light beam
and do not aim the beam at other persons or at animals.
To display the correct time on the wall or the ceiling, the hinged projection
element must be swung forwards and the room must be appropriately darkened.
1. Place the switch Projection On/Off
2. Set the projection element as desired. The time is projected onto the required
position. Projection distance approx. 40cm - 3m.
3. Adjust the clarity of the projection with the projection focus

Background lighting for the display and projection

Pressing the button Projection/Display Illumination
illumination and the time projection for approx. 10 seconds.

Cleaning

• Keep the appliance and the ventilation openings clean at all times.
• Fluids may not, under any circumstances, penetrate into the interior of
the appliance.
• Use a soft cloth to clean the appliance housing.
• Never use detergents or solvents that could damage plastics.
12.11.2007
e
button interrupts the alarm tone for 8 minutes.
k
to position ON.
- 11 -
13:10 Uhr Seite 11
l
ALARM
d
.
r
activates the display