Two Satellites Via Toneburst A/B - Dreambox DM820 HD User Manual

7. With the Navigation-Buttons (
8. With the Navigation-Buttons (
9. With the Navigation-Buttons (
10. Press the OK-Button to save this settings.
You are taken back to the "Choose tuner" menu.
If you have trouble with "Tune failed" messages please set the "Send DiSEqC only on sattelite
change" to "yes".

7.1.2 Two satellites via Toneburst A/B

Use this type of configuration if you want to receive two satellites from one LNB each. It does not matter
if you use one or two dishes to achieve this. Connect the two coax cables from the two LNBs to a so-called
Toneburst switch and connect the coax cable from the Toneburst switch to your Dreambox.
Follow this steps:
1. Press the Menu-Button to open the main OSD menu.
2. With the Navigation-Buttons (
3. With the Navigation-Buttons (
Button.
4. With the Navigation-Buttons (
Button.
5. With the Navigation-Buttons (
6. With the Navigation-Buttons (
7. With the Navigation-Buttons (
8. With the Navigation-Buttons (
) choose the option "Single".
) choose the option"Satellite".
) choose the desired Satellite.
Two satellites via Toneburst
) choose the option "Setup" and press the OK-Button.
) choose the option "Service searching" and press the OK-
) choose the option "Tuner configuration" and press the OK-
) choose the option "DVB-S2 Tuner" and press the OK-Button.
) choose the option "Mode".
) choose the option "Toneburst A/B".
) choose the option "Port A".
52