Konica Minolta bizhub PRO 920 Network Scanner Operations page 55

4
Scan to PC
You can transmit copied data from the copier to a computer to store them
by using PageScope JobEditor/PageScope JobEditorServer. PageScope
JobEditor or PageScope JobEditorServer needs to be installed and config-
ured.
!
Detail
For more information on PageScope JobEditor, refer to "PageScope
JobEditor" on Page 11-3.
For more information on PageScope JobEditorServer, refer to "Page-
Scope JobEditorServer" on Page 11-9.
PageScope JobEditor is connected manually to the copier. PageScope
JobEditorServer is connect automatically to the copier. For information
on switching between the manual and automatic connection, refer to
"Changing Data Transmission Method to PC" on Page 4-28.
PageScope JobEditor and PageScope JobEditorServer for USA are ex-
cluded.
About how to obtain PageScope JobEditor and PageScope JobEditorS-
erver, contact your service representative.
Store copied data in a computer in the following steps.
1
Press [Box] on the control panel and
then press [Store] key.
2
Press the [Scan to PC] key.
The setting screen appears.
4-20
About the Copied Data Processing Features
bizhub PRO 920 Scanner