HP 15 TouchSmart Notebook PC Maintenance And Service Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. 15 TouchSmart Notebook PC
  6. Maintenance and service manual

HP 15 TouchSmart Notebook PC Maintenance And Service Manual

Hide thumbs Also See for 15 TouchSmart Notebook PC:
Table of Contents

Advertisement

Quick Links

HP 15 TouchSmart Notebook PC
HP 15 Notebook PC
Compaq 15 TouchSmart Notebook PC
Compaq 15 Notebook PC
Maintenance and Service Guide

Advertisement

Table of Contents
loading

Related Manuals for HP 15 TouchSmart Notebook PC

Summary of Contents for HP 15 TouchSmart Notebook PC

  • Page 1 HP 15 TouchSmart Notebook PC HP 15 Notebook PC Compaq 15 TouchSmart Notebook PC Compaq 15 Notebook PC Maintenance and Service Guide...
  • Page 2 The information contained herein is subject to http://www.microsoft.com for details. change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...

  • Page 5: Table Of Contents

    Table of contents 1 Product description ............................1 2 External component identification ......................... 5 Display ................................... 5 Front ..................................6 Right side ................................6 Left side ................................. 7 Top ..................................8 TouchPad ............................. 8 Lights ..............................9 Button ..............................10 Keys ..............................
  • Page 6 RTC battery ............................68 Memory module ..........................69 Display assembly ..........................70 7 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) in Windows 8.1 ..........77 Starting Setup Utility (BIOS) ..........................77 Updating the BIOS ..............................77 Determining the BIOS version ......................77 Downloading a BIOS update ......................
  • Page 7 Using HP PC Hardware Diagnostics (UEFI) ......................83 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ..........84 9 Specifications ............................. 85 Computer specifications ............................85 39.6-cm (15.6-in) display specifications ......................86 Hard drive specifications ............................. 87 DVD±RW SuperMulti DL Drive specifications ...................... 88 10 Backing up, restoring, and recovering in Windows 8.1 ..................
  • Page 8 viii...

  • Page 9: Product Description

    Product description Category Description Product name HP 15 Notebook PC HP 15 TouchSmart Notebook PC Compaq 15 Notebook PC Compaq 15 TouchSmart Notebook PC Processors AMD A8-6410 processor (2.0-GHz, 2-MB L2 cache, 1600-MHz DDR3L AMD A6-6310 processor (1.8-GHz, 2-MB L2 cache, 1600-MHz DDR3L AMD A4-6210 processor (1.8-GHz, 2-MB L2 cache, 1600-MHz DDR3L...
  • Page 10 Supports weight saver option Audio/video Single digital microphone HD audio, dual speakers HP TrueVision HD: HD camera (fixed, no tilt with activity LED, 1280×720 by 30 frames per second) Ethernet Integrated 10/100 network interface card (NIC) Wireless Integrated wireless local area network (WLAN) options by way of wireless module...
  • Page 11 Category Description Ports HDMI version 1.4 supporting 1920 ×1200 @ 60Hz Hot Plug/unplug and auto detect for correct output to wide-aspect vs. standard aspect video RJ-45 (Ethernet, includes link and activity lights) USB 3.0 (1 port) USB 2.0 (2 ports) AC Smart Pin adapter plug Headphone/microphone in combo jack Keyboard/pointing...
  • Page 12 Chapter 1 Product description...

  • Page 13: External Component Identification

    For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region. To access this guide in Windows 8.1, from the Start screen, type support, and then select the HP Support Assistant app. Display...

  • Page 14: Front

    Front Component Description Memory card reader Reads optional memory cards that store, manage, share, or access information. To insert a card: Hold the card label-side up, with connectors facing the slot, insert the card into the slot, and then push in on the card until it is firmly seated.

  • Page 15: Left Side

    For additional safety information, refer to the Regulatory, Safety, and Environmental Notices. To access this guide in Windows 8.1, from the Start screen, type support, and then select the HP Support Assistant app. NOTE: When a device is connected to the jack, the computer speakers are disabled.

  • Page 16: Top

    Component Description NOTE: Be sure that the device cable has a 4-conductor connector that supports both audio-out (headphone) and audio- in (microphone). (10) Hard drive light Blinking white: The hard drive is being accessed. ● (11) Power light On: The computer is on. ●...

  • Page 17: Lights

    Lights Component Description ● Power light On: The computer is on. ● Blinking: The computer is in the Sleep state, a power- saving state. The computer shuts off power to the display and other unneeded components. ● Off: The computer is off or in Hibernation. Hibernation is a power-saving state that uses the least amount of power.

  • Page 18: Button

    Button Component Description ● Power button When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep.

  • Page 19: Keys

    Keys Component Description Displays system information when pressed in combination with key. Executes frequently used system functions when pressed in combination with the spacebaror the key. Windows key (Windows 8.1) Returns you to the Start screen from an open app or the Windows desktop. NOTE: Pressing the Windows key again will return you to the previous screen.

  • Page 20: Bottom

    Bottom Component Description Battery lock and unlock latch Locks and unlocks the battery in the battery bay. Battery bay Holds the battery. Vent Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation.

  • Page 21: Labels

    Labels The labels affixed to the computer provide information you may need when you troubleshoot system problems or travel internationally with the computer. IMPORTANT: All labels described in this section will be located in one of 2 places depending on your computer model: Affixed to the bottom of the computer, or located in the battery bay.
  • Page 22 Component Model number (select models only) Revision number ● Regulatory label(s)—Provide(s) regulatory information about the computer. ● Wireless certification label(s)—Provide(s) information about optional wireless devices and the approval markings for the countries or regions in which the devices have been approved for use. Chapter 2 External component identification...

  • Page 23: Illustrated Parts Catalog

    Illustrated parts catalog Computer major components NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Computer major components...
  • Page 24 For use in French Canada 749658-DB1 For use in Denmark, Finland, and Norway 749658-DH1 For use in the Czech Republic and Slovakia 749658-FL1 Top cover (includes touchpad) Black licorice/textured HP 15 models 749639-001 Purple HP 15 models 775088-001 Chapter 3 Illustrated parts catalog...
  • Page 25 All system boards use the following part numbers: xxxxxx-001: Without the Windows operating system xxxxxx-501: Windows 8.1 Standard xxxxxx-601: Windows 8.1 Professional For use in HP 15 and Compaq 15 models with a touch screen: ● AMD A8-6410 processor, UMA graphics, and 2 memory slots 782949-xxx ●...
  • Page 26 1-TB, 5400-rpm, 2.5-inch for use in HP 15 and Compaq 15 models 778192-005 750 GB, 5400 rpm hard drive, 2.5 inch for use in HP 15 and Compaq 15 models 778190-005 500-GB, 5400-rpm, 7-mm for use in HP 15 and Compaq 15 models...

  • Page 27: Miscellaneous Parts

    Miscellaneous parts Component Spare part number HP Smart AC adapter: 65-W non-PFC EM HP Smart AC adapter (for use in the People’s Republic of China and India only) 714657-001 AC adapter, 65-W, non-PFC, 4.5 mm 710412-001 45-W non-PFC, non-slim HP Smart AC adapter (for use in all countries and regions except for the 741727-001 People’s Republic of China and India)

  • Page 28: Display Assembly Subcomponents

    Display assembly subcomponents Item Component Spare part number Display bezel (includes Mylar screw covers): For use with HP models 749644-001 For use with Compaq models 749645-001 Display cable (includes display panel cable and webcam/microphone cable) Non-touch screen 749646-001 Touch screen...
  • Page 29 For use in models with a touch screen 774166-001 Raw display panel (39.6-cm [15.6-in], HD, WLED, BrightView) For use in HP 15 and Compaq 15 models without a touch screen 750635-001 For use in HP 15 models with a touch screen...

  • Page 30: Mass Storage Devices

    Mass storage devices Item Component Spare part number Optical drive (DVD+/-RW Double-Layer SuperMulti) 750636-001 Hard drive, SATA; does not include bracket): 1-TB, 5400-rpm, 2.5-in 778192-005 750-GB, 5400-rpm, 2.5-in 778190-005 500-GB, 5400-rpm, 7-mm 778186-005 Hard drive bracket 749648-001 Chapter 3 Illustrated parts catalog...

  • Page 31: Plastics Kit

    Plastics Kit Item Component Spare part number Plastics Kit, includes: 749656-001 Left cover Right cover Rubber Kit Component Spare part number Rubber Kit, includes: 749652-001 Front feet Rear feet Plastics Kit...

  • Page 32: Sequential Part Number Listing

    Atheros AR9565 802.11bgn 1x1 WiFi + BT4.0 combo Adapter 740715-001 4-cell, 41-Whr, 2.8-Ah Li-ion battery 741727-001 45-W non-PFC, non-slim HP Smart AC adapter (for use in all countries and regions except for the People’s Republic of China and India) 746641-001 3-cell, 31-Whr, 2.8-Ah Li-ion battery...
  • Page 33 Spare part Description number 749645-001 Display bezel for use with Compaq models 749646-001 Display cable for use in models with out a touch screen (includes display panel cable and webcam/microphone cable) 749647-001 Power connector cable 749648-001 Hard drive bracket 749649-001 USB board (includes cable) 749650-001 Power button board (includes cable)
  • Page 34 System board for use only with computer models with Windows 8.1 Professional and equipped with an AMD A4-5000 processor and UMA graphics (includes replacement thermal materials) 750635-001 Raw display panel, non-touch screen, for use in HP 15 and Compaq 15 models 750636-001 DVD+/-RW Double-Layer SuperMulti Drive 753076-005 Broadcom BCM43142 802.11 bgn 1x1 Wi-Fi + BT4.0 HMC Combo Adapter...
  • Page 35 System board with AMD A4-5000 processor and 2 GB of discrete graphics for use in models with Windows 8.1 Professional 760958-001 Top cover for use in red HP 15 models (includes touchpad) 760959-001 Top cover for use in white HP 15 models (includes touchpad)
  • Page 36 Raw display panel for use in Compaq 15 touch screen models 764877-001 Raw display panel for use in HP 15 touch screen models 764888-001 Display cable for use in models with a touch screen (includes display panel cable and webcam/microphone cable)
  • Page 37 Top cover for use in sparkling black HP 15 models (includes touchpad) 774163-001 Antennas for use in models with a touch screen 774164-001 Display enclosure for use in black licorice/textured HP 15 models with a touch screen 774166-001 Hinges for use in models with a touch screen (left and right) 775079-001...
  • Page 38 Chapter 3 Illustrated parts catalog...

  • Page 39: Removal And Replacement Procedures Preliminary Requirements

    Removal and replacement procedures preliminary requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screwdriver ● Magnetic screwdriver ● Phillips P0 and P1 screwdrivers Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures.

  • Page 40: Drive Handling

    Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the computer, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 41: Packaging And Transporting Guidelines

    Typical electrostatic voltage levels Relative humidity Event Walking across carpet 35,000 V 15,000 V 7,500 V Walking across vinyl floor 12,000 V 5,000 V 3,000 V Motions of bench worker 6,000 V 800 V 400 V Removing DIPS from plastic tube 2,000 V 700 V 400 V...
  • Page 42 ● Avoid contact with pins, leads, or circuitry. ● Turn off power and input signals before inserting or removing connectors or test equipment. Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ●...

  • Page 43: Removal And Replacement Procedures For Customer Self-Repair Parts

    Customer Self-Repair is supported in your location. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures...
  • Page 44 Remove the battery from the computer (3). Chapter 5 Removal and replacement procedures for Customer Self-Repair parts...

  • Page 45: Optical Drive

    Optical drive Description Spare part number DVD+/-RW Double-Layer SuperMulti Drive 750636-001 Before removing the optical drive, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.
  • Page 46 Remove the optical drive bracket (2). Reverse this procedure to reassemble and install the optical drive. Chapter 5 Removal and replacement procedures for Customer Self-Repair parts...

  • Page 47: Keyboard

    Keyboard Description Spare part number Keyboard for use in the United States 749658-001 749658-002 Keyboard for use in the United Kingdom 749658-031 Keyboard for use in Germany 749658-041 Keyboard for use in France 749658-051 Keyboard for use in Italy 749658-061 Keyboard for use in Spain 749658-071 Keyboard for use in Portugal...
  • Page 48 Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 35). To remove the keyboard: Position the computer upside down with the front toward you. Remove the two Phillips PM2.5×5.0 screws that secure the keyboard to the computer.
  • Page 49 Rotate the keyboard over onto the palm rest (1), and the lift the ZIF connector (2) and disconnect the keyboard cable from the system board (3). Reverse this procedure to install the keyboard. Component replacement procedures...
  • Page 50 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts...

  • Page 51: Removal And Replacement Procedures For Authorized Service Provider Parts

    Accessing these parts can damage the computer or void the warranty. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures...
  • Page 52 Before removing display subcomponents while the display assembly is still attached to the computer, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.
  • Page 53 Disconnect the cable (2) from the module. To remove the display panel: Remove the four Phillips PM2.5×3.5 screws that secure the display panel to the enclosure. Rotate the display panel onto the keyboard to gain access to the display cable connection on the back of the panel (1).
  • Page 54 On the back of the display panel, release the adhesive strip (2) that secures the display panel cable to the display panel, and then disconnect the cable (3). Reverse this procedure to reassemble and install the display bezel, webcam/microphone module, and display panel.

  • Page 55: Top Cover

    NOTE: The top cover spare part kit includes the TouchPad. Description Spare part number Top cover for use in black licorice/textured HP 15 models (includes touchpad) 749639-001 Top cover for use in purple HP 15 models (includes touchpad) 775088-001 Top cover for use in sparkling black HP 15 models (includes touchpad)
  • Page 56 Remove the two Phillips broadhead PM2.5×2.0 screws from the optical drive bay (4). Remove the seven Phillips PM2.5×5.0 screws that secure the top cover to the computer. Position the computer upright with the front toward you. Disconnect the power button board cable (1) and the touchpad button board cable (2). Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...
  • Page 57 Remove the four Phillips PM2.5×5.0 screws (3) that secure the top cover to the computer. Lift the rear edge of the top cover (1) until it disengage from the base enclosure. Remove the top cover (2). Reverse this procedure to install the top cover. Component replacement procedures...

  • Page 58: Power Button Board

    Power button board Description Spare part number Power button board (includes cable) 749650-001 Before removing the power button board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 59: Touchpad Button Board

    TouchPad button board Description Spare part number TouchPad button board (includes bracket) 749651-001 Before removing the TouchPad button board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 60 Remove the TouchPad button board and cable. Reverse this procedure to install the power button board and cable. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 61: Hard Drive

    Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket. Description Spare part number 1-TB, 5400-rpm, 2.5-in 778192-005 750 GB, 5400 rpm, 2.5 in 778190-005 500-GB, 5400-rpm, 7-mm 778186-005 Hard drive bracket 749648-001 Before removing the hard drive, follow these steps: Shut down the computer.
  • Page 62 To remove the hard drive bracket, remove the two Phillips PM3.0×4.0 screws (1) that secure the bracket to the hard drive. Remove the hard drive bracket from the hard drive (2). Reverse this procedure to reassemble and install the hard drive. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 63: Wlan Module

    WLAN module Description Spare part number Atheros AR9485 802.11b/g/n 1x1 WiFi Adapter 675794-005 Realtek RT8723BE 802.11bgn 1x1 Wi-Fi and Bluetooth 4.0 combination adapter 753077-005 Atheros AR9565 802.11bgn 1x1 WiFi + BT4.0 combo Adapter 733476-005 Realtek RTL8188EE 802.11bgn Wi-Fi Adapter 709848-005 Broadcom BCM43142 802.11 bgn 1x1 Wi-Fi + BT4.0 HMC Combo Adapter 753076-005 CAUTION:...
  • Page 64 Remove the WLAN module by pulling the module away from the slot at an angle (3). NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module.

  • Page 65: Fan

    NOTE: The fan spare part kit includes replacement thermal materials. Description Spare part number 753894-001 NOTE: To properly ventilate the computer, allow at least 7.6 cm (3.0 in) of clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist.
  • Page 66 Remove the fan from the computer (3). Reverse this procedure to install the fan. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 67: Power Connector Cable

    Power connector cable Description Spare part number Power connector cable 749647-001 Before removing the power connector cable, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 68: System Board

    System board NOTE: The system board spare part kit includes replacement thermal materials. Description Spare part number System board (includes replacement thermal materials): All system boards use the following part numbers: xxxxxx-001: Without the Windows operating system xxxxxx-501: Windows 8.1 Standard xxxxxx-601: Windows 8.1 Professional For use in touch screen models: ●...
  • Page 69 Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery (see Battery on page 35). Remove the following components: ● Keyboard (see Keyboard on page ●...
  • Page 70 Lift the right side of the system board (1), and then pull the board away from the computer enough to disengage the connectors from the side of the base enclosure (2). NOTE: Be careful not to inadvertently disconnect the speaker cable when lifting the system board. Flip the system board upside down to gain access to the speaker connector (1).

  • Page 71: Usb Board

    USB board Description Spare part number USB board (includes cable) 749649-001 Before removing the USB board, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 72: Speakers

    Speakers Description Spare part number Speakers (includes left and right speakers and cable) 749653-001 Before removing the speakers, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 73: Heat Sink Assembly

    Reverse this procedure to install the speakers. Heat sink assembly NOTE: The heat sink assembly spare part kit includes replacement thermal materials. Description Spare part number Heat sink for use in models with an AMD processor, UMA graphics, and 1 memory slot 753895-001 Heat sink for use in models with an AMD processor, discrete graphics, and 1 memory slot 762728-001...
  • Page 74 Remove the heat sink assembly (2) from the system board. Discrete graphics: UMA graphics: Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...
  • Page 75 ● Discrete graphics: Thermal paste is used on the processor and associated heat sink area (1)(2), as well as the graphics chip and associated heat sink area (3)(4). ● UMA graphics: Thermal paste is used on the heat sink (1) and the processor (2). Reverse this procedure to reassemble and install the heat sink assembly.

  • Page 76: Rtc Battery

    RTC battery Description Spare part number RTC battery 759981-001 Before removing the RTC battery, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect all external devices connected to the computer.

  • Page 77: Memory Module

    Memory module Description Spare part number 8-GB (PC3L, 12800, 1600-MHz) 693374-005 4-GB (PC3L, 12800, 1600-MHz) 691740-005 2-GB (PC3L, 12800, 1600-MHz) 691739-005 Before removing a memory module, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 78: Display Assembly

    Description Spare part number Raw display panel (39.6-cm [15.6-in], HD, WLED, BrightView) For use in HP 15 and Compaq 15 models without a touch screen 750635-001 For use in HP 15 models with a touch screen 764877-001...
  • Page 79 Description Spare part number Purple HP 15 models 775089-001 Gray Compaq 15 models 749642-001 Black Compaq 15 models 760962-001 Gray HP 15 models 760963-001 Red HP 15 models 760964-001 White HP 15 models 760965-001 Blue HP 15 models 760966-001 Silver HP 15 models...
  • Page 80 Release the wireless antenna cables from the clips (3) built into the base enclosure. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. Remove the four Phillips PM2.5×5.0 screws (1) (two from each hinge) and one Phillips PM2.5×3.5 screw (2) (on the right hinge) that secures the display assembly to the computer.
  • Page 81 Remove the display bezel (4). NOTE: In this procedure, the display will NOT be connected to the computer, as shown in the following image. To remove the webcam/microphone module: Position the display assembly with the top edge toward you. Disconnect the cable (1) from the module. Remove the webcam/microphone module (2).
  • Page 82 NOTE: In this procedure, the display will NOT be connected to the computer, as shown in the following image. Rotate the display panel onto the keyboard to gain access to the display cable connection on the back of the panel (1). On the back of the display panel, release the adhesive strip (2) that secures the display panel cable to the display panel, and then disconnect the cable (3).
  • Page 83 Remove the eight Phillips PM2.5×3.5 screws (1) that secure the display hinges to the display panel. Remove the display hinges (2). To remove the wireless antenna cables and transceivers, release the wireless antenna cables from the clips built into the display enclosure. Component replacement procedures...
  • Page 84 To remove the display/webcam cable, remove the cable from the clips built into the display enclosure (1), and then remove the cable from the display enclosure (2). If replacing the display enclosure, be sure that the subcomponents (including the webcam/microphone module, the antenna receivers, and all associated cables and hardware) are transferred to the new enclosure.

  • Page 85: Using Setup Utility (Bios) And Hp Pc Hardware Diagnostics (Uefi) In Windows 8.1

    Updating the BIOS Updated versions of the BIOS may be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file.

  • Page 86: Downloading A Bios Update

    Using HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components.

  • Page 87: Downloading Hp Pc Hardware Diagnostics (Uefi) To A Usb Device

    The BIOS searches three places for the diagnostic tools, in the following order: Connected USB drive NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page...
  • Page 88 Chapter 7 Using Setup Utility (BIOS) and HP PC Hardware Diagnostics (UEFI) in Windows 8.1...

  • Page 89: Computer Setup (Bios) And Advanced System Diagnostics In Suse Linux

    Computer Setup (BIOS) and Advanced System Diagnostics in SUSE Linux Computer Setup, or Basic Input/Output System (BIOS), controls communication between all the input and output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Computer Setup includes settings for the types of peripherals installed, the startup sequence of the computer, and the amount of system and extended memory.

  • Page 90: Restoring Factory Settings In Computer Setup

    Updated versions of the BIOS may be available on the HP Web site. Most BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file.

  • Page 91: Downloading A Bios Update

    Using HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components.

  • Page 92: Downloading Hp Pc Hardware Diagnostics (Uefi) To A Usb Device

    NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page BIOS When the diagnostic tool opens, use the keyboard arrow keys to select the type of diagnostic test you want to run, and then follow the on-screen instructions.

  • Page 93: Specifications

    Specifications Computer specifications Metric U.S. Dimensions (touch models) Depth 25.9 cm 10.2 in Width 37.8 cm 14.88 in Height 2.53 cm 1.00 in Weight 2190 g 4.83 lb 3 cell battery 2230 g 4.92 lb 4 cell battery Input power Operating voltage and current 18.5 V dc @ 3.5 A or 19.5 V dc @ 3.33 A –...

  • Page 94: 39.6-Cm (15.6-In) Display Specifications

    39.6-cm (15.6-in) display specifications Metric U.S. Active diagonal size 39.6-cm 15.6-in Resolution 1600x900 (HD+) Active area 309.399x173.952 Surface treatment Anti-glare Contrast ratio 300:1 (typical) Response time 8 ms Brightness 200 nits (typical) Viewing angle Backlight Luminance uniformity @ 13 points 1.4 (typ), 1.6 (max) Lifetime (1/2 luminance) 12,000 hours...

  • Page 95: Hard Drive Specifications

    Hard drive specifications 1-TB* 750-GB* 500-GB* Dimensions Height 9.5 mm 9.5 mm 7.0 mm or 9.5 mm Length 100.4 mm 100.4 mm 100.6 mm Width 69.9 mm 69.9 mm 70.1 mm Weight 115.0 g 115.0 g 92.0 g Interface type SATA SATA SATA...

  • Page 96: Dvd±Rw Supermulti Dl Drive Specifications

    DVD±RW SuperMulti DL Drive specifications Applicable disc Read: Write: CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD- CD-R and CD-RW ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo- DVD+R, DVD+RW, DVD-R, DVD-RW, CD, Video CD), Multisession CD (Photo-CD, CD- DVD-RAM EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW, DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD- R, DVD-RW, DVD+R, DVD+RW, DVD-RAM Center hole diameter...

  • Page 97: Backing Up, Restoring, And Recovering In Windows 8.1

    Restoring and recovering your system Creating recovery media and backups After you successfully set up the computer, create HP Recovery media. This step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced.

  • Page 98: Restore And Recovery

    The creation process can take up to an hour or more. Do not interrupt the creation process. ● If necessary, you can exit the program before you have finished creating all of the recovery DVDs. HP Recovery Manager will finish burning the current DVD. The next time you start HP Recovery Manager, you will be prompted to continue, and the remaining discs will be burned.

  • Page 99: Recovering Using Hp Recovery Manager

    ● If you have replaced the hard drive, you can use the Factory Reset option of HP Recovery media to restore the factory image to the replacement drive. For more information, see Recovering using HP Recovery Manager on page ●...

  • Page 100: Using Hp Recovery Media To Recover

    Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly.

  • Page 101: 11 Backup And Recovery In Suse Linux

    Performing a system recovery Recovery allows you to repair or restore the computer to its original factory state. You can create an HP Factory Image Restore DVD, using an installed or an external DVD±RW optical drive. You can also restore the computer to its factory condition from the HP dedicated recovery partition on the hard drive.
  • Page 102 Software, drivers, and updates not installed by HP must be manually reinstalled. Personal files must be restored from a backup. To restore the computer using the HP Factory Image Restore DVD, you must first create the recovery disc. To create the recovery disc: NOTE: HP recommends that you create the HP Factory Image Restore DVD in the event of a system failure.

  • Page 103: 12 Statement Of Volatility

    The steps below will remove personal data from the notebook PC, including the nonvolatile memory found in Intel-based and AMD-based system boards. Some of these steps are disclosed in the Maintenance & Service Guides available for HP PC products available on the product support pages at www.hp.com.
  • Page 104 Remove and retain the storage drive or clear the contents of the drive. Hard Disk Drive (HDD) Clear the HDD contents by using the HP Disk Sanitizer® utility or a third party application that, ideally, is U.S. Department of Defense (DOD) 5220.22-M approved.

  • Page 105: Non-Volatile Memory Usage

    (keyboard, when the system BIOS is memory and is accessible) mouse, & updated. available on the HP battery website. Writing data management). to this ROM in an inappropriate manner can render the PC nonfunctional. DIMM Serial...
  • Page 106 Fingerprint 512kByte Stores By enrolling in HP Only a digitally signed reader Flash fingerprint ProtectTools Security application can make templates. Manager. the call to write to the flash.

  • Page 107: Questions And Answers

    Questions and answers How can the BIOS settings be restored (returned to factory settings)? Turn on or restart the computer and press when prompted near the bottom of the display. Select File, then select Restore defaults. Follow the on-screen instructions. Select File, save changes and exit, then press Enter.
  • Page 108 100 Chapter 12 Statement of Volatility...

  • Page 109: 13 Power Cord Set Requirements

    13 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts ac, or from 220 to 240 volts ac. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased.

  • Page 110: Requirements For Specific Countries And Regions

    Requirements for specific countries and regions Country/region Accredited agency Applicable note number Argentina IRAM Australia Austria Belgium CEBEC Brazil ABNT Canada Chile Denmark DEMKO Finland FIMKO France Germany India Israel Italy Japan The Netherlands KEMA New Zealand SANZ Norway NEMKO The People's Republic of China Saudi Arabia SASO...
  • Page 111 Country/region Accredited agency Applicable note number The flexible cord must be Type SVT/SJT or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole grounding type with a NEMA 5-15P (15 A, 125 V ac) or NEMA 6-15P (15 A, 250 V ac) configuration. CSA or C-UL mark. UL file number must be on each element.
  • Page 112 104 Chapter 13 Power cord set requirements...

  • Page 113: 14 Recycling

    When you remove these components, handle them carefully. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that might require special handling at end-of-life. Disposal of mercury may be regulated because of environmental considerations. For disposal or recycling information, contact your local authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiai.org.
  • Page 114 Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel disengages from the display assembly. Remove the display bezel (3). Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). Remove all screws (1) that secure the display panel assembly to the display enclosure.
  • Page 115 Remove the display panel assembly (2) from the display enclosure. Turn the display panel assembly upside down. Remove all screws that secure the display panel frame to the display panel. Use a sharp-edged tool to cut the tape (1) that secures the sides of the display panel to the display panel frame.
  • Page 116 Lift the top edge of the backlight cover (2) and swing it outward. Remove the backlight cover. Turn the display panel upright. Remove the backlight cables (1) from the clip (2) in the display panel. Turn the display panel upside down. 108 Chapter 14 Recycling...
  • Page 117 Remove the backlight frame from the display panel. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. Remove the backlight from the backlight frame. Disconnect the display cable (1) from the LCD panel. Remove the screws (2) that secure the LCD panel to the display rear panel.
  • Page 118 Release the tape (4) that secures the LCD panel to the display rear panel. Remove the LCD panel. Recycle the LCD panel and backlight. 110 Chapter 14 Recycling...

  • Page 119: Index

    32 Bluetooth label 14 spare part number 25 product description 2 boot order display cable removing 53 changing HP Recovery Manager illustrated 20 spare part number 29 removing 74 specifications 87 bottom 14 spare part number 25, 28 Hard drive bracket...
  • Page 120 45, 73, 74 illustrated 23 Plastics Kit spare part number 25, 29 legacy support, USB 81 illustrated 23 HP PC Hardware Diagnostics (UEFI) lights spare part number 25 downloading 79, 84 AC adapter 7 pointing device 3 using 78...
  • Page 121 91 specifications illustrated 20 USB flash drive 92 computer 85 removing 44, 73 using HP Recovery media 90 display 86 spare part number 25 recovery media DVD±RW SuperMulti DL Drive 88 Windows creating 89 hard drive 87...
  • Page 122 114 Index...

This manual is also suitable for:

15 notebook pcCompaq 15 touchsmart notebook pcCompaq 15 notebook pc

Table of Contents