Fm Radio Tuner Operation - LENCO BT-9000 Instruction Manual

Antenna
For the best radio reception, fully extend the rod antenna located at rear of the unit.
MENU Option
In the FM radio mode, the unit allows you to select following options.
Note:
Note:
3. You can press the MENU button to exit menu setting mode at any time.
Auto-scan and store Preset Stations
The unit allows you to store up to 20 FM stations for easy recall at any time.
mode.
automatically scan for stations from low to high frequency and then store them in the preset location.
Note: After each auto-scan & store operation, it will overwrite the existing preset stations by overwriting and
storing the new stations in their place.
FM Radio Tuning and manual store Preset Stations
mode.
FM Radio Tuning
3. You can have following ways to tune to a desired station:
button from the remote control and it will tune to the next higher radio station.
button from the remote control and it will tune to the next lower radio station.
Note:
station location.
tuner mode. The newly tuned frequency will replace the frequency in the selected preset station location.
7. Repeat steps 3 to 6 to store other stations, if apply.
Notes:
to normal tuner mode.

FM Radio Tuner Operation

poor quality audio from distant stations.
result in poor quality audio. The audio quality can be improved using mono.
GB 7