Advertisement
15
Side piece
Metal retainer
16
17
18
Middle cover strip
Push up
Potterton Solar - Solar Thermal Domestic Hot Water System
Roofing nail
2.0
Installation of Solar Collector
2.5
In Roof mounting
15: Secure the side pieces to roof battens using the metal
retainers and roofing nails supplied.
16: Attach the left and right hand side cover strips.
17: Secure the side cover strips to the lower front
corner sections on the right and left of the
collector(s) using sealed plumbing screws 4.5x35mm.
18: If fitting two or more collectors, push the middle
cover strip over each adjacent collector panel from
the lower edge as far as it will go.
15
Advertisement
