Other Information; Setting Up The Remote Control - Sony SAT-A55P Service Manual

Other Information

Setting Up the Remote Control

POWER
MUTING
CABLE TV
SAT
FUNCTION
AUDIO
CABLE SAT
VOLUME TV
+
SLEEP
TV/SAT TV/VIDEO
1 2
3
4 5
6
9
7 8
DISPLAY ENTER
0
ALT AUDIO JUMP
FAVORITE INDEX CATEGORY GUIDE
VOL CH
MENU
EXIT
VTR3 2 DVD AMP RM-Y802
CODE SET
SATELLITE
RECEIVER
RM-Y802
Remote Control
z
Tips
• Remember to aim the remote control at
the device you are trying to operate.
• To control extra VTRs (VCRs), a DVD
player or an amplifier with the
RM-Y802 remote control, slide the
device switch to VTR2, 3, DVD or AMP
after you have set up the remote with
the correct manufacturer code.
The RM-Y139 and RM-Y802 remote controls can be programmed to
operate your other audio/video equipment.
1 Find the code(s) for the manufacturer of the
device you want to operate with this remote
control.
You can find these codes on pages 66 and 67.
2
Press the CODE SET button.
The function indicators begin flashing.
CODE SET
3
Press the 0–9 buttons to input the manufacturer
code, then press the ENTER button.
The function indicator goes off, and the remote is setup to operate
that device.
1
4
Test the remote control.
Press the POWER button for that equipment, then press other
operation controls such as the CH +/– buttons.
If the device does not respond to the remote control, repeat from
step 2 and enter a different manufacturer code in step 3.
FUNCTION
CABLE
ENTER
0 1
SAT
TV
65