Sharp XV-Z9000U Service Manual page 19

6. Removing the lamp unit, CW fan, outlet fan, bimetal, wind way duct, shield
plate and formater PWB.
14. Remove the three screws and detach the lamp unit.
15. Remove the two screws and detach the CW fan.
16. Remove the three screws and detach the outlet fan.
17-1. Remove the two screws and detach the bimetal.
17-2. Remove the two screws and detach wind way duct.
18-1. Remove the six screws and detach the shield plate(B).
18-2. Remove the three screws and detach the formater PWB.
18-3. Remove the three screws and detach the shield plate(A).
Shield Plate(B)
17-2
Wind way Duct
17-1
Bimetal
16
Formater PWB
18-2
18-1
Outlet Fan
Lamp unit
19
Shield Plate(A)
18-3
18-2
XV-Z9000U/E
15
14