Panasonic Lumix DMC-FX100 Operating Instructions Manual page 55

4 Press 3/4 to select [PICT.MODE]
and then press 1.
5 Press 3/4 to select the item and
then press [MENU/SET].
If you selected [
2
shown in step
Item
[30fpsVGA]
640k480 pixels
[10fpsVGA]
[30fpsQVGA]
320k240 pixels
[10fpsQVGA]
If you selected [
2
shown in step
Item
[30fps16:9L]
848k480 pixels
[10fps16:9L]
1280k720 pixels
[15fps16:9H]
• fps "frames per second"; This refers to
the number of frames used in 1 second.
• You can record smoother motion
pictures with "30 fps".
• You can record longer motion pictures
with "10 fps" although the picture quality
is lower.
• The picture size is large with
[15fps16:9H] although the picture
quality is not as smooth.
• The file size with [10fpsQVGA] is small
so it is suitable for e-mails.
• You can only record motion pictures
to the built-in memory when the
[ASPECT RATIO] is [
picture size is [30fpsQVGA] or
[10fpsQVGA] (320k240 pixels).
] on the screen
Picture size fps
30
10
30
10
] on the screen
Picture size fps
30
10
15
] and the
6 Press [MENU/SET] to close the
menu.
• You can also press the shutter
button halfway to close the menu.
• The focus range becomes the same as
macro mode. [5 cm (Wide)/30 cm (Tele) to
¶]
• Refer to P115 for information about the
available recording time.
• The available recording time displayed on
the screen may not decrease regularly.
• This unit does not support recording
motion pictures on MultiMediaCards.
• When you set the picture quality to
[30fpsVGA], [30fps16:9L] or [15fps16:9H],
we recommend using a high speed SD
Memory Card with "10MB/s" or greater
displayed on the package.
• Depending on the type of the card,
recording may stop in the middle.
• We recommend using Panasonic's SD
Memory Cards/SDHC Memory Cards.
• Depending on the type of the card, the
card access indication may appear for a
while after recording motion pictures. This
is not a malfunction.
• Motion pictures can be recorded
continuously for up to 15 minutes.
The maximum continuous recording time
(up to 15 minutes) is displayed on the
screen.
• When motion pictures recorded with the
camera are played back on other
equipment, the quality of the picture and
sound may deteriorate and it may not be
possible to play them back. Also the
recording information may not be
displayed correctly.
• In motion picture mode [
use the direction detection function and
the review function.
• You cannot set [MODE2] on the optical
image stabilizer function.
• The bundled software includes QuickTime
to play back motion picture files recorded
with the camera on the PC.
Advanced (Recording pictures)
], you cannot
VQT1F66
55