dbx AFS2 Quick Start Manual

Hide thumbs Also See for AFS2:

Download this manual See also: Owner's Manual

WHAT'S IN THE BOX

• AFS2 Processor

• Power Cable

MAKE CONNECTIONS

With your system powered down, make connections to the AFS2. See the

reverse side of this Quick Start Guide for reference connection diagrams and

application notes.

SEE REVERSE SIDE FOR CONNECTION DIAGRAMS

SET THE OPERATING LEVEL SWITCHES

Set the +4/-10 switches on the back panel of the AFS2 to match the nominal

operating level of your mixer. If you're not sure what the operating level is on

the connectors on your mixer, check the mixer's manual.

Quick Start Guide

PRODUCT REGISTRATION

To activate your warranty and stay

informed on important product updates,

please register your product at www.

dbxpro.com.

DOWNLOAD THE OWNER'S MANUAL

In our effort to be more environmentally responsible and

provide the most up-to-date product information, owner's

manuals can now be downloaded online at www.dbxpro.

com.

APPLY POWER

Apply power to the AFS2 and your system. Make sure to turn your amplifiers

or powered speakers on last.

CONNECT INCLUDED

IEC POWER CABLE

RUN THE WIZARD

Connect all your mics and perform a sound check then press the WIZARD

button and follow the on-screen instructions.

PRESS TO BEGIN

TURN & PRESS TO MAKE

ON-SCREEN SELECTIONS

Page 1: Quick Start Guide
SET THE OPERATING LEVEL SWITCHES RUN THE WIZARD Set the +4/-10 switches on the back panel of the AFS2 to match the nominal Connect all your mics and perform a sound check then press the WIZARD operating level of your mixer. If you’re not sure what the operating level is on button and follow the on-screen instructions.
Page 2 This master insert connections. If you have a system places the AFS2 before the master fader so that EQ, you can place it before or after the AFS2 in it can work optimally no matter where the master the chain.