Rear - Epson EH-TW6600W User Manual

Introduction

Rear

Name
a Speaker
b Power inlet
c Trigger Out port
d RS-232C port
e Audio (L-R) port
f Component port
g Security slot (
)
h Audio Out port
i Cable holder
j Remote receiver
k USB port (TypeA)
l Service port
m Video port
n HDMI2 port
o PC port
p HDMI1 port
The projector's built-in speaker. Outputs audio. Set Inverse Audio to On to
use the built-in speaker when the projector is suspended from a ceiling.
Settings - Audio - Inverse Audio
s
Connect the power cord.
Connects with external devices such as motorized screens.
When controlling the projector, connect the projector to a computer with an
RS-232C cable. This port is for control use and should not normally be used.
p.113
s
Inputs audio from equipment connected to the Video port, the Component
ports, or the PC port.
s
Connects to the component (YCbCr or YPbPr) output port on video equip‐
ment. p.18
s
The security slot compatible with the MicroSaver security system manufac‐
tured by Kensington. For more details, visit the homepage of Kensington at
http://www.kensington.com/.
Outputs audio during playback to external speakers.
When a cable is connected to a port, the weight of the cable may result in
imperfect insertion of its connector. In order to prevent this, put a commer‐
cially available clamping band (cable tie) through this holder to bind and fix
the cable.
Receives signals from the remote control.
Connects USB devices such as a USB memory device or a digital camera, and
projects images as a slideshow.
In addition, connects an optional wireless LAN unit.
Service port. This is not normally used.
Connects to the composite video output port on video equipment.
Connects HDMI compatible video equipment and computers.
Connects to the RGB output port on a computer.
Connects HDMI compatible video equipment and computers.
In addition, connects MHL compatible smart devices or tablets.
10
Function
p.79
p.24
s
p.18
p.23
s
p.70
s
s
p.19
s
p.19
s
p.22
s
p.18
s
p.18
s
p.19
p.18
s
p.19
s