11 Hotel Mode Access
11.1. Purpose
Restrict a function for hotels.
11.2. Access command to the Hotel mode setup menu
In order to display the Hotel mode setup menu, please enter the following command (within 2 second).
[TV] : Hold Vol [Down] + [Remote] : Press AV button 3times.
Then, the Hotel mode setup menu is displayed.
11.3. To exit the Hotel mode setup menu.
Disconnect AC power cord from wall outlet or switch off thepower with the [POWER] button on the main unit.
11.4. Explain the Hotel mode setup menu.
Hotel Mode
Initial INPUT
Initial VOL level
Maximum VOLlevel Adjust maximum volume.
Initial POS
Button lock
Remote lock
Item
Select hotel mode ON/OFF
Select input signal modes.
Set the input, when each time power is switched on.
Selection :
Off/Analogue TV/Digital TV/AV1/AV2/AV3/PC/HDMI 1/HDMI 2/HDMI 3:
• • • • Off: give priority to a last memory.
• • • • Selectable input is depend on the model.
Adjust the volume when each time power is switched on.
Selection/Range :
Off/0 to 100
• • • • Off: give priority to a last memory.
Range :
0 to 100
Select programme number.
Selection :
Off/0 to 99
• • • • Off: give priority to a last memory.
Select local key conditions.
Selection :
Off/SETUP/MENU/All
• • • • Off: altogether valid.
• • • • SETUP: only F-key is invalid.
(Tuning guide (menu) can not be selected.)
• • • • MENU: only F-key is invalid.
(only Volume/Mute can be selected.).
• • • • ALL: altogether invalid.
Select remote control key conditions.
Selection :
Off/SETUP/MENU
• • • • Off: altogether valid..
• • • • SETUP: only Setup menu is invalid.
• • • • MENU: Picture/Sound/Setup menu are invalid.
Function
19
TH-L32X10A