Setting The Bluetooth Audio Codecs; Setting The Bluetooth Standby Mode - Sony HT-GT1 Operating Instructions Manual

Setting the BLUETOOTH
audio codecs
You can select the BLUETOOTH
audio codecs when the connected
BLUETOOTH device supports
Advanced Audio Coding (AAC).
1
Press OPTIONS.
2
Press  /  repeatedly to select
"BT AAC," then press
3
Press  /  repeatedly to select
"ON" or "OFF," then press
ON: Select this setting if the
ˎ
BLUETOOTH device supports
Advanced Audio Coding (AAC).
OFF: Select this setting if
ˎ
the BLUETOOTH device only
supports Sub Band Codec
(SBC).
Notes
You can enjoy high quality sound if
ˎ
the AAC is selected. In case you cannot
listen to AAC sound from your device,
select "OFF."
If you change this setting while the
ˎ
system is connected to a BLUETOOTH
device, the BLUETOOTH device will
be disconnected. To connect to the
BLUETOOTH device, perform the
BLUETOOTH connection again.
30
GB
Setting the BLUETOOTH
standby mode
The BLUETOOTH standby mode
enables the system to turn on
automatically when you establish
the BLUETOOTH connection with a
BLUETOOTH device.
1
2
.
3
.
Press OPTIONS.
Press  /  repeatedly to select
"BT STBY," then press
Press  /  repeatedly to select
"ON" or "OFF," then press
When the BLUETOOTH standby
mode is set to on, the system waits
for a BLUETOOTH connection even
when the system has been turned
off. When a BLUETOOTH connection
is established, the system turns on
automatically.
.
.