Radial Engineering BigShot i/o Owner's Manual

FEATURES AND FUNCTIONS
INPUT-1 - ¼" jack for first control circuit and the capacitive
1
instrument connection. filtering effects from long cables.
INPUT-2 - ¼" jack for second DIM - bypass switch for the DIM
2 7
instrument connection. level control.
DIM LEVEL - control lets you 8 TUNER - switch determines
3
reduce the level of the instru- whether the TUNER output is on
ment connected to INPUT-2. all the time or only when MUTE
footswitch is depressed.
TUNER - ¼" jack connects
4
to tuner. MUTE - footswitch turns the
9
OUTPUT jack off for silent on-
OUTPUT - ¼" jack connects stage tuning through the TUNER
5
to amplifier. output.
10
6 BRIGHT - three position SELECT - footswitch toggles
switch counteracts any ef- between INPUT-1 and 2 to select
fects from the DIM LEVEL the desired instrument.
5 4 3
6
7
8
9 10
Radial Engineering BigShot i/o User Guide

IMPORTANT NOTICE!

The Radial BigShot i/o is a passive switcher that is specifically designed for use
with amplifiers with proper electrical safety grounds that have been approved by
nationally recognized electrical authorities such as UL in the United States, CSA
in Canada and other similar bodies in countries around the world.
It is further understood that due to the unpredictable nature of connecting any
number of different amplifiers and pedals together, using the BigShot i/o can
pose a potential for electric shock, and as such, the user is completely respon-
sible for any and all consequences as these are beyond our control.
This means that you are completely responsible to ensure the safe and proper
use of the BigShot i/o and to clearly understand that using the BigShot i/o
confirms you have taken full responsibility. If you are not 100% sure of your
actions, please consult a qualified technician for advice before using this device
or connecting any of your equipment to it.
RADIAL LIMITED THREE YEAR
TRANSFERABLE WARRANTY
Radial Engineering - a division of JP Cabletek Electronics Ltd.- warrants this product
to be free from defects in material and workmanship and will remedy any such defects
free of charge according to the terms of this warranty. Radial Engineering will repair
or replace at its option any defective component(s) of this product, excluding the
finish, the footswitch (footswitch is warranted for 90 days) and wear and tear from
normal use, for a period of three (3) years from the original date of purchase. In the
event that a particular product is no longer available, Radial Engineering reserves
the right to replace the product with a similar product of equal or greater value. To
make a request or claim under this limited warranty, the product must be returned
2
prepaid in the original shipping container (or equivalent) to Radial Engineering or
to an authorized repair centre and you must assume the risk of loss or damage. A
copy of the original invoice showing date of purchase and the dealer name must
accompany any request for work to be performed under this limited warranty. This
1
limited warranty shall not apply if the product has been damaged due to abuse,
misuse, misapplication, accident or as a result of service or modification by any
other than an authorized repair centre.
THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE ON THE
FACE HEREOF AND DESCRIBED ABOVE. NO WARRANTIES, WHETHER
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, SHALL EXTEND BEYOND THE RESPECTIVE WARRANTY PERIOD
DESCRIBED ABOVE OF THREE YEARS.
RADIAL ENGINEERING SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS ARISING
FROM THE USE OF THIS PRODUCT. THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY VARY
DEPENDING ON WHERE YOU LIVE.
Radial Engineering BigShot i/o User Guide
True to the Music
BigShot i/o
Owner's Manual
Part # R800 7202
CAUTION: PLEASE READ THE IMPORTANT NOTICE ON
THE BACK COVER BEFORE USING THE BIGSHOT i/o
Radial Engineering
1638 Kebet Way, Port Coquitlam BC V3C 5W9
Tel: 604-942-1001 Fax: 604-942-1010
email: info@radialeng.com
Radial Engineering is a division of C•TEC (JP CableTek Electronics Ltd.)
Radial BigShot i/o users guide - v1.0 - Part #: R870 1125 00
Subject to change without notice