Using The Karaoke Function - LG DKE573XB Owner's Manual

Using the Karaoke Function

1. Load a karaoke disc.
2. Set the MIC VOL control to the minimum level to
3. Connect a microphone to MIC socket.
Note:
If a microphone is not connected the karaoke menu will not
appear.
4. Press PLAY to start playback.
5. Adjust MIC VOL control and then sing a song.
6. Press KARAOKE during playback.
7. Use 3/4 to select an desired item (ECHO,
8. Use 1/2 to adjust value of the item
26
Downloaded From Disc-Player.com LG Manuals
prevent acoustic feedback (e.g. a loud howling
sound) before connecting the microphone.
If you want to set KARAOKE option follow steps 6-
8.
KARAOKE menu appears.
MELODY, VOICE, EFFECT or KEY).
The display changes as shown in the chart below.
selected.
ECHO: You can adjust the echo volume by
pressing the 1/2 buttons.
MELODY: If you wish to sing only to the backing
band or orchestra unaccompanied by a vocal
guide melody, set MELODY to Off.
VOICE: If you wish to sing a duet with the
recorded karaoke singer, select a voice you
desire.
Voice Select
Left speaker
V1 Voice1
V2 Voice2
V1+V2 Voice1
Off None voice
EFFECT: You can use Special Effects. Each time
1 1 /2 2 is pressed, the Special Effect changes as
shown below.
Off → HARMONY → FLANGE → CHORUS
KEY: You can change the key by pressing the
1 1 /2 2 buttons.
Note:
Controlling the key when DVD player is connected to
amplifier (receiver) with digital audio connection, may cause
mute the sound of the front left/right speakers connected with
amplifier (receiver).
In that case, you must change the sound mode of the
amplifier (receiver) for the output of the speakers.
9. Press KARAOKE to exit the KARAOKE menu.
Note:
• The microphone may not be available during special
playback. (ex. slow)
• The karaoke feature functions only with karaoke-
compatible discs.
• The VOICE and MELODY menus may not be available on
some karaoke discs.
• For more details, refer to the information supplied with the
disc.
• There is no microphone's sound output during a disc
encoded with DTS is playing back.
Output
Right speaker
Voice1
Voice2
Voice2
None voice