Camera
Problem
A picture is too
light.
Stored pictures are
damaged.
The Pictures
Remaining number
does not decrease
after taking a
picture.
Chapter 8
Cause
The flash is not needed. Change to Auto Flash
The subject was too
close when the flash was
used.
The card was removed
when the ready light was
blinking.
The picture does not
take up sufficient space
to decrease the picture
remaining number.
Solution
(page
14).
Move so there is at least 2.6
feet (0.8 m) between the
camera and the subject.
Make sure the ready light is
not blinking before
removing the card.
The camera is operating
normally. Continue taking
pictures.
51