Installation - Acer FT240HQL User Manual

INSTALLATION

To install the monitor to your host system, please follow the steps as given
below:
Steps
1. 1-1 Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2/1-3
Connect
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer or connect MHL
cable to the portable device.
Connect the USB Cable(Optional)
2. 2-1
2-2/2-3 Connect the USB 2.0 cable to port.
3. Connect the Audio Cable(Only Audio-Input Model)(Optional)
4. Connect power adapter and power cord
Connect the pow
a properly grounded AC outlet.
5. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
6. If the monitor still does not function properly, please refer to the
troubleshooting section to diagnose the problem.
Downloaded from ManualMonitor.com Manuals
HDMI or MHL Cable
er adapter and power cord
4
4 3
1-3 1-2 1-1
to the monitor, then to
2-2
USB2.0 port
2-3
USB2.0 port
VGA
HDMI HDMI USB
2-3 2-2
2
1-1 3
2 1- 1-3
VGA
HDMI
HDMI
USB
7