The System - Sony MHC-ECL99BT Operating Instructions Manual

Pairing this system with a
BLUETOOTH device
Pairing is an operation where
BLUETOOTH devices register with
each other beforehand. Once a
pairing operation is performed, it
does not need to be performed again.
If your device is an NFC-compatible
smartphone, the manual pairing
procedure is not necessary.
1
Place the BLUETOOTH device
within 1 meter (3 feet) from

the system.

2
Press BLUETOOTH to select
the BLUETOOTH function.
If the BLUETOOTH function is
selected when the system has
no pairing information, the
system enters the pairing mode
automatically.
Note
If the BLUETOOTH connection is
established, terminate the BLUETOOTH
connection. See "To terminate the
BLUETOOTH connection" (page 23).
3
Hold down BLUETOOTH for
5 seconds or more.
"PAIRING" flashes on the display.
4
Perform the pairing procedure
on the BLUETOOTH device.
For details, refer to the operating
instructions of your BLUETOOTH
device.
5
Select the model number of
the unit on the display of the
BLUETOOTH device.
For example, select
"SONY:MHC-ECL99BT" or
"SONY:MHC-ECL77BT."
If passkey is required on the
BLUETOOTH device, enter "0000".
6
Perform the BLUETOOTH
connection on the
BLUETOOTH device.
When pairing is completed and
the BLUETOOTH connection is
established, "BT AUDIO" appears on
the display.
Depending on the BLUETOOTH
device, connection may start
automatically after pairing is
completed.
Notes
ˎ You can pair up to 8 BLUETOOTH devices.
If the 9th BLUETOOTH device is paired, the
oldest paired device will be deleted.
ˎ "Passkey" may be called "Passcode," "PIN
code," "PIN number" or "Password," etc.,
depending on the device.
ˎ The pairing standby status of the system
is canceled after about 5 minutes. If
pairing is not successful, repeat from
step 1.
ˎ If you want to pair with another
BLUETOOTH device, repeat steps 1 to 6.
To cancel the pairing operation
Press BLUETOOTH.
21
GB