Troubleshooting
Status
Picture is too light
Direct printing (PictBridge enabled printer) problems
Status
Cannot find the desired picture.
The Direct print menu interface
turns off.
Cannot print pictures.
Camera or printer display an error
message.
50
Solution
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off
■
Move so that the distance between you and the subject is within the
effective flash range.
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Auto and SCN-Custom modes, adjust the Exposure Compensation
(page
35).
Solution
■
Turn on the camera. Make sure the camera is not in
Favorites mode.
■
Use the Direct print menu to change the image
storage location.
■
Press any camera button to redisplay the menu.
■
Make sure there is a connection between the camera
and the printer
■
Make sure the printer and the camera have power.
■
Follow the prompts to resolve the issue.
(page
9).
(page
www.kodak.com/go/support
44).