Troubleshooting
Status
Memory card is almost
or entirely full
Battery life is short
You cannot take a
picture
Error message appears
on LCD
Memory card not
recognized or camera
freezes with card
Computer/connectivity problems
Status
Pictures do not
transfer to computer
50
Solution
■
Transfer the pictures to the computer (see
■
Delete pictures from the card or insert a new card.
■
Change the image storage location to internal memory
page
33).
■
Make sure the correct battery type is installed (see
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■
Insert a new or charged battery (see
■
Turn the camera off, then on again.
■
Depress the Shutter button all the way (see
■
Insert a new or charged battery (see
■
Memory is full. Transfer pictures to the computer (see
delete pictures (see
(see page
33), or insert another card.
■
Turn the camera off, then on again.
■
Remove the memory card.
■
Turn off the camera. Remove the battery. Wipe the contacts with
a clean, dry cloth.
■
Insert a new or charged battery.
■
If the problem still exists, get help (see
■
Card may be corrupted. Format the card in the camera
page
33).
■
Use another memory card.
Solution
■
See Help in EasyShare software.
■
Visit Interactive Troubleshooting & Repairs
www.kodak.com/go/itg.
page
page
page
14), change image storage location
www.kodak.com/go/support
page
44).
(see
page
59).
1).
page
6).
1).
page
page
53).
(see
44),