Kodak EASYSHARE M22 Extended User Manual page 50

Troubleshooting
Status
Memory card not
recognized or camera
freezes with card
You cannot take a
picture
Computer/connectivity problems
Status
Slide Show does not
run on an external
display device
Computer does not
communicate with
the camera
Direct printing (PICTBRIDGE enabled printer) problems
Status
Cannot print to a
PICTBRIDGE Printer
43
Solution
■
Card may be corrupted. Format the card in the camera
page 38).
■
Use another memory card. Only SD or SDHC Cards are supported.
■
Turn the camera off, then on again.
■
Depress the Shutter button all the way
■
Insert a new/charged battery
battery whenever necessary.
■
Memory is full. Transfer pictures to the computer
delete pictures
Solution
■
Adjust the camera Video Out setting to NTSC or PAL
page 37).
■
Make sure the external device settings are correct. (See the
device's user guide.)
■
Turn off the camera, then turn it back on.
■
Make sure the battery is installed correctly
charged (see page
■
Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer
turn on the camera.
■
See KODAK Software Help at www.kodak.com/go/camerasw.
Solution
■
In the Setup menu, change the Computer Connection setting to
Other Application
(see page
(see page 24), or insert another card.
2).
(see page 37).
www.kodak.com/go/support
(see
(see page 7).
1). Charge the Li-Ion
(see page
(see
(see page 1) and
(see page 39). Then
39),