Table of Contents
Advertisement
If...
Picture orientation is
not accurate
Flash does not fire
Battery life is short
Camera displays an
error code
Computer/connectivity problems
If...
The camera does not
communicate with the
computer
Slide Show does not
run on an external
video device
www.kodak.com/go/support
Try one or more of the following
Set the Orientation Sensor
Check flash setting, and change as needed
Recharge the battery fully or insert a new one
■
Press the Shutter button all the way.
■
Battery is exhausted. Recharge the battery fully
■
Wait until the ready light is green before attempting to
take another picture.
■
Transfer pictures to the computer
pictures from the camera
locations
(page
memory
(page
8).
■
Contact your local service provider or visit
www.kodak.com/go/support.
Try one or more of the following
■
Make sure the EasyShare software is installed
■
Turn on the camera.
■
Recharge the battery or insert a new one
■
Make sure USB cable is securely connected on camera and
computer USB port
■
Try another USB port on the computer.
■
See the EasyShare software Help.
■
Adjust the camera Video Out setting (NTSC or PAL,
page
28).
■
Make sure the external device settings are correct (see the
device's user's guide).
(page
27).
(page
(page
34), switch image storage
25), or insert a card with available
(page
51).
Troubleshooting
(page
16).
(page
2).
(page
3).
51), delete
(page
43).
(page
2).
56
Advertisement
Table of Contents
