Summary of Contents for Radial Engineering Shuttle 500
Page 1
True to the Music ™ Shuttle Insert and Routing 500 Series Module User Guide ® True to the Music www.radialeng.com Radial Engineering Ltd. 1588 Kebet Way, Port Coquitlam British Columbia, Canada, V3C 5M5 tel: 604-942-1001 • fax: 604-942-1010 email: info@radialeng.com...
Block Diagram ..............9 Warranty ............Back cover Congratulations and thank you for your purchase of the Radial Shuttle 500 module. The Shuttle is a simple yet highly effective tool that will help you effi ciently route signals in and out of your Workhorse or 500 series rack.
1/4” phone jacks. Available when used with the Radial Workhorse. 6. OMNIPORT (Workhorse): type unbalanced insert jack confi gured TIP= Rear Panel SEND; RING=RETURN. Available when used with the Radial Workhorse. Shuttle™ 500 Module Radial Engineering Ltd.
INSERT switch or the mixer channel ON switch to turn the external signal on and off. MUSIC PLAYER (UNBALANCED) MAIN LEVEL LEVEL LEVEL LEVEL LEVEL 48V PHANTOM +16V / -16V LEVEL LEVEL LEVEL LEVEL LEVEL LEVEL RECORDER MONO Made in Canada MIX BUSS Shuttle™ 500 Module Radial Engineering Ltd.
® True to the Music SHUTTLE 500 MODULE SPECIFICATIONS* Clip Level - Input +22dbu (Workhorse mix buss) Clip Level - Output >+25dbu Dynamic Range >130dB Frequency Response 20Hz to 20KHz (+/- 0.5dB) Gain Input Impedance 20K Ohms (Balanced) Noise <-125dbu...
Page 12
THREE YEAR TRANSFERABLE LIMITED WARRANTY RADIAL ENGINEERING LTD. (“Radial”) warrants this product to be free from defects in material and workmanship and will remedy any such defects free of charge according to the terms of this warranty. Radial will repair or replace (at its option) any defective component(s) of this product (excluding fi nish and wear and tear on components under normal use) for a period of three (3) years from the original date of purchase.