Getting help
Status
Picture is too dark
Picture is too light
Direct printing (PICTBRIDGE enabled Printer) problems
Status
Cannot print to a
PICTBRIDGE Printer
42
Solution
■
Reposition the camera for more available light.
■
Use Fill flash (see
behind the subject.
■
Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off (see
■
Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Smart Capture mode, adjust the Exposure Compensation
page
31).
Solution
■
In the Setup menu, change the Computer Connection setting to
Other Application
page
7) or change your position so light is not
page
7).
(see page
35).
www.kodak.com/go/support
page
44.)
page
44.)
(see