Installing The Photo Traveler Drivers And Software - Veo PHOTO TRAVELER User Manual

Installing the Photo Traveler Drivers and Software

Before you can use the full function of your Photo Traveler Camera, the drivers
and software must be installed first.
Note: Palm Desktop software must be installed in order to install the Photo
Traveler software.
1) Insert the CD-ROM into your CD-ROM drive. Autorun will display the Photo
Traveler Installation screen.*
2) Click Install to start the Photo Traveler Installation.
3) Follow the prompts to finish the installation.**
4) Plug your Palm handheld into the cradle and plug the cradle's cable to your
computer (USB port or serial port as appropriate) if you haven't already done so.
5) Wait for your computer to detect the USB port. If it does not detect, press the
Hot Sync button on your cradle to detect new hardware.
Veo Photo Traveler for Palm handhelds - 6 -