SOYO SY-6VCA User Manual page 29

Hardware Installation
3. After completely inserting the CPU, Now your CPU is ready for use.
To remove the CPU, press the two notches on top of the CPU inward.
Now press the two slides on the retention module down and remove
the CPU.
Note: Installing a heat sink and cooling fan on top of your CPU is
necessary for proper heat dissipation. Failing to install these items
may result in overheating and possible burn-out of your CPU.
2-3.1.1 CPU Fan Installation
Your Slot 1 processor kit comes with a cooling fan. Mount the fan on the
processor according to the instructions provided by the manufacturer. The
fan is a key component that will ensure system stability. The fan prevents
overheating, therefore prolonging the life of your CPU.
Note: Remember to connect the fan to the appropriate power source.
25
SY-6VCA