OFFICES…………………………………………………..13 INTRODUCTION The ACM380E &ACM570E monochrome cameras are designed with the purpose of easy installation, high quality video and durability when properly installed. The two monochrome cameras are ideal for general- purpose surveillance applications, or as an input device for an image processing system.
FEATURES High sensitivity with minimum illumination needed for quality video: 0.1 Lux for ACM380E, and 0.25 Lux for ACM570E. Low image distortion and residual, withstanding electric and magnetic field interference and mechanical vibration. Applications: 1) Surveillance 2) Monitoring 3) Security Excellent signal-to-noise ratio of >...
Page 5
PRIMARY OPERATING CONTROLS AND THEIR FUNCTIONS - see page 4 Lens Connector Plug: This 4-pin connector supplies the power and DC control signal to a video auto iris lens or a DD lens. Note: Refer to figure 2 shown below to insure correct operation. (Pre-wired lenses are available from supplier).
Page 6
DRIVER - Figure 2 Back Focus Mechanism: This adjustment is to ensure all lenses can be correctly focused. It may only be necessary to adjust this if using a zoom lens. Follow industry standards for back focusing a CCTV camera. Video Output Connector (VIDEO OUT): A 1.0Vp -p/75ohms composite video signal is provided at this connector.
Page 7
Selects between lens type employed, VIDEO for auto iris lens that requires a video drive signal, and DD for auto iris lens that requires a DC drive signal. Back Light Compensation (BLC) ON/OFF: When strong, unwanted background lighting interferes with the clarity of important areas, turn this switch to the “ON”...
PRECAUTIONS 1. Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws or cover. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. 2. Handle the camera with care. Do not abuse the camera. Avoid striking or shaking it as the camera could be damaged by improper use or storage.
INSTALLATION Safety Advice Excess voltage will destroy the camera – never apply more than the operating voltage range as indicated in the instruction manual. Prior to applying power make all connections. Opening or removing of any assembly screws voids the warranty. Use a monitor with 75- ohm impedance.
ACM380E TECHNICAL SPECIFICATIONS: Operational Image Sensor : 1/3” Interline Transfer CCD Sensor Effective Pixels : 510 (H) x 492 (V) Pixels Resolution : 380 TVL Sensitivity : 0.1 Lux ( F1.2 ) Signal to Noise Ratio : 52 dB ( AGC OFF) : 1.0 Vp-p composite video via 75 Ω...
Page 11
Mechanical Camera Dimensions : 2.55”(W) x 2.2”(H) x 4.95”(D) - 65(W) x 56(H) x 126(D) mm. Weights : 1.4 lbs. (630 g.) Lens Mount : CS or C (C mount adapter supplied). Environmental Operation Temperature : -10°C ~ +50°C (14°F to 122°F) Humidity : 20% to 80% relative humidity, non condensing.
ACM570E SPECIFICATIONS : Operational Image Sensor : 1/3” Interline Transfer CCD Sensor Effective Pixels : 768 (H) x 494 (V) Pixels Resolution : 580 TVL Sensitivity : 0.25 Lux (F1.2) Signal to Noise Ratio : 52dB (AGC OFF) : 1.0 Vp-p composite video via 75 Ω connector on the rear of the camera. Video Output Lens Mount : CS or C (C mount adapter supplied).
Page 13
Mechanical Camera Dimensions : 2.55”(W) x 2.2”(H) x 4.95”(D) - 65(W) x 56(H) x 126(D) mm. Weights : 1.4 lbs. (630 g.) Lens Mount : CS or C (C mount adapter supplied). Environmental Operation Temperature : -10°C ~ +50°C (14°F to 122°F) Humidity : 20% to 80% relative humidity, non condensing.
Page 14
Tsuen Wan, N.T, 91120, Palaiseau ADEMCO Video (Headquarters) Hong Kong France 852-2405-2323 33-1-6932-1090 175 Eileen Way, Syosset, NY 11791, USA 1-516-921-6704 LATIN AMERICA ADEMCO International ADEMCO International (Headquarters) (Latin America) 180 Michael Drive, Syosset 1769 N.W. 79 Ave. NY11791, USA...
Page 15
Security House Amperestraat 41 1446 TR Purmerend Netherlands 31-299-419-000 Video Controls Ltd. Aston Fields Rd Whitehouse Ind. Estate Runcorn England WA7 3DL 44-1928-754000...