Putting Yourself in the Picture
There might be times when you want everyone, including yourself, to be
in the picture. For these occasions, use the Self-Timer feature to create a
10-second delay between the time you press the Shutter button and the
time the picture is taken.
R
W E
P O
n n
C o
e f e
P r
w
v i e
R e
r e
p t u
C a
1
With the camera on, set the Slider switch
to Capture.
2
Press the Self-Timer button.
The Self-Timer icon appears in the
T
Status Display.
W
To cancel the Self-Timer before the
picture is taken, press the Self-Timer
t
s
e c
c e
button again or turn off the camera.
r e n
3
Place the camera on a flat, steady surface
or tripod.
4
Frame your subject in the viewfinder and
press the Shutter button.
The red Self-Timer light, located on the front
of the camera, turns on and stays lit for 8
seconds, then flashes for 2 additional seconds
just before the picture is taken.
The Self-Timer turns off when the picture
is taken.
2
11