Kodak EASYSHARE CX4230 User Manual page 71

Camera/Computer Communications
Camera Communications
Problem
The computer
cannot
communicate with
the camera.
Chapter 9
Cause
There is a problem with
the configuration of the
USB port on your
computer.
Camera power is off.
Battery is not charged. Replace or recharge the
Some Advanced Power
Management utilities on
laptops can turn off
ports to save battery life.
USB cable is not
securely connected.
Software is not installed. Install the software
There are too many
applications running on
your computer.
The Battery Monitor or
similar software runs
constantly.
Solution
See the following file on the
KODAK EASYSHARE Software
CD: USB.html
Or, go to: www.kodak.com/
go/camerasupport
Turn on the camera
(page 5).
batteries (page 4,
See the Power Management
section of your laptop user's
guide to disable this feature.
Connect cable to camera and
computer port (page
(page 45).
Disconnect your camera
from the computer. Close all
software applications,
reconnect your camera and
try again.
Close that software before
starting the KODAK Software.
page 54).
47).
63