Tips, Safety, Maintenance - Kodak EASYSHARE CX4210 User Manual

Tips, Safety, Maintenance

m
Always follow basic safety precautions. Refer to the "Important Safety
Instructions" booklet packed with your camera.
m
Do not allow any chemicals, such as suntan lotion, to come into contact
with the painted surface of the camera.
m
If the camera has been subjected to inclement weather or you suspect
water has gotten inside the camera, turn off the camera and remove the
battery and card. Allow all components to air-dry for at least 24 hours
before using the camera again.
m
Clean the lens and LCD:
1 Blow gently on the lens or LCD to remove dust and dirt.
2
Moisten the lens or LCD by breathing lightly on it.
3 Wipe the lens or LCD gently with a soft, lint-free cloth or an untreated
lens-cleaning tissue.
Do not use cleaning solutions unless they are designed specifically for
camera lenses. Do not wipe the camera lens or LCD with chemically
treated eyeglass lens tissue. It may scratch the lens.
m
Clean the outside of the camera by wiping with a clean, dry cloth. Never use
harsh or abrasive cleaners or organic solvents on the camera or any of its
parts.
m
Service agreements are available in some countries. Please contact a dealer
of Kodak products for more information.
m
For digital camera disposal or recycling information, visit the KODAK
Website http://www.kodak.com/global/en/service/tib/tib4357.shtml; please
contact your local authorities or, in the US, visit the Electronics Industry
Alliance Web site: www.eiae.org.
80
Chapter 11