Chapter 4
Hardware Configurations
4.2
Drive enclosure (3.5" type)
4.1.3
Drives
2.5" drives and 3.5" drives are available.
Up to twenty-four 2.5" drives can be installed in a single 2.5" type controller enclosure.
Up to twelve 3.5" drives can be installed in a single 3.5" type controller enclosure.
Drives can be added during system operation. When an error occurs, replacement operations can be per-
formed while the system is running.
●
2.5" Drives
The 2.5" drive specifications are shown below.
Table 4.5 2.5" Drive Specifications (2.5" Type Controller Enclosure)
Product name
SAS disks
Nearline SAS disks
●
3.5" Drives
The 3.5" drive specifications are shown below.
Table 4.6 3.5" Drive Specifications (3.5" Type Controller Enclosure)
Product name
SAS disks
Nearline SAS disks
4.2
Drive enclosure (3.5" type)
This section explains the main components in the drive enclosure.
The drive enclosure contains drives installed in the front, and I/O modules and power supply units in the rear.
Drive enclosures can be added during system operation. When an error occurs, replacement operations can
be performed while the system is running.
Drive interface
Serial Attached SCSI
Drive interface
Serial Attached SCSI
55
FUJITSU Storage ETERNUS DX60 S3 Disk storage system Overview
Copyright 2014 FUJITSU LIMITED
Storage capacity
300GB, 600GB, 900GB, 1.2TB
300GB, 600GB
1TB
Storage capacity
900GB, 1.2TB
2TB, 4TB, 6TB
Rotational speed
10,000rpm
15,000rpm
7,200rpm
Rotational speed
10,000rpm
7,200rpm
P3AM-8972-01ENZ0