Kodak EASYSHARE CX4300 User Manual page 71

Camera
Problem
Picture is not clear. The lens is dirty.
Slide show does
not run on external
video device.
Slide show does
not run on LCD
screen.
Chapter 9
Cause
Subject too close when
taking picture.
Camera may be in Close-
up (page 19) and the
subject is too far away
for proper focus.
Subject or the camera
moved while the picture
was taken.
The subject is too far
away for the flash to be
effective.
Video Out setting is
incorrect.
External device is set
incorrectly.
The camera may not be
accessing the correct
storage location.
Solution
Clean the lens (page
Move so there is at least 11.8
in (0.3 m) between the
camera and the subject; or
turn on Close-up
Turn off Close-up
Hold the camera steady
while taking the picture and
for at least one second after
pressing the Shutter button.
Move so there is no more
than the following distance
between the camera and the
subject: 9.8 ft (3 m).
Adjust the camera Video Out
setting (NTSC or PAL,
page 42).
Refer to the external device's
user's guide.
Check the picture storage
location setting (page
82).
(page 19).
(page 19).
11).
63