Utility Program Application; Nas Player Setup; Audio Record Setup - Siemens CCMC1315-LP Configuration

10

Utility program application

10.1

NAS player setup

10.2

Audio record setup

Building Technologies
Fire Safety & Security Products
If recording to a NAS is selected for the camera, use this player for review.
This application is found on the CD included in the delivery.
1. Execute NAS record setup first.
2. Click on the cross cursor button and choose the path of the NAS file to be
played.
3. Click on the Play button.
4. Click on the Stop button.
You can record a new voice file, then upload it to the network camera. It can make
an alarm out event. After you finish audio record, please perform alarm audio
setting.
This application is found on the CD included in the delivery.
Perform audio recording in the following sequence
1. Execute audio record setup first.
2. Click on the cross cursor button and choose the path where you want to save
the audio (wav) file.
3. Install a speaker before you start recording your voice.
4. Click on red button and start recording your voice.
5. Click on Stop button.
6. Recording is now finished
Utility program application
CCMx1315-LP Configuration Manual EN
05.05.2009
59