Setting Date/Time (Clock Set)
•
The clock is not set when the camera is shipped.
Turn the camera on.
•
The [PLEASE SET THE CLOCK] message
appears. (This message does not appear in
[PLAYBACK] Mode.)
A [MENU/SET] button
B Cursor buttons
Press [MENU/SET].
Press 2/1 to select the items (year, month,
day, hour, minute, display sequence or time
display format), and press 3/4 to set.
‚: Cancel without setting the clock.
Press [MENU/SET] to set.
•
After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording Mode, and check that the display reflects the settings that were
performed.
•
When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the
below.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 1.
•
It can be changed in steps
•
Once a charged battery has been installed for 24 hours, the clock setting is maintained
for 3 months using the built-in clock battery even without the battery.
Changing the clock setting
3
4
and
to set the clock.
"
Changing the clock setting
Preparation
"
procedure
17
(ENG) VQT2G40