Advertisement
How to Use your Walkman
Playing Music
The Home menu is the starting point of each application.
Enjoy playing music transferred to your Walkman.
1
To display [Music] on the
Press and hold the HOME•BACK button.
From the Home menu, select
Home menu
then press the
To select an item
Rotate the shuttle switch to select the
2
desired menu, and then press the
Select the desired search method and items
button to confirm.
until a song list appears, and then select the
To return to the previous
Press the HOME•BACK button.
desired song.
screen
Playback starts and the music playback screen is displayed.
Press the
button again to pause playback on the music
playback screen.
Play back music.
Song title
Play back music stored on your smartphone
Artist name
that is connected via Bluetooth connection.
Playback status
Elapsed time of
Receive FM broadcast stations.
current song
¼ Hint
ÿ
Change various settings on your Walkman
ˎ If there is no operation during music playback, the screen will be turned off.
ÿ
(Pairing, etc.).
ˎ To return to the music playback screen from other screens during music
ÿ
playback, press and hold the HOME•BACK button to display
then press the HOME•BACK button again.
ˎ If there is no operation for an extended period while paused, your Walkman
ÿ
The screens and illustrations shown are for reference only and may differ
will be turned off automatically.
from the actual product or screen.
ˎ For detailed instructions on transferring music to your Walkman, various
ÿ
music playback operations, listening to FM radio, and various settings, refer
to the Help Guide installed on your computer or at the URL mentioned in
the "About the manuals" section on the cover page of this manual.
Pairing and Connecting to Your
Smartphone
[Music], and
You can use your Walkman as a wireless headset for listening to music
button.
stored on your smartphone. However, you cannot listen to music or FM
radio being played on the Walkman wirelessly through Bluetooth
speakers or headphones.
Receive
Transmit
Shuffle setting
1
Put your Walkman in pairing mode.
Equalizer setting
From the Home menu of your Walkman, select
Battery status icon
– [Bluetooth Settings] – [Bluetooth On/Off] – [Bluetooth On]
Status of phone call
– [Add Device (Pairing)].
via Bluetooth
2
On your smartphone, turn on the Bluetooth
Repeat setting
connection
function, and then search your Walkman on
the Bluetooth settings screen.
When the list of detected devices appears on the Bluetooth
[Music], and
settings screen, tap [NWZ-M504].
If passkey input is required, input "0000."
Follow the on-screen instructions to complete the pairing.
Your Walkman and the smartphone are paired to each other and a
connection is made.
¼ Hint
ÿ
ˎ To turn off the Bluetooth function, from the Home menu of your Walkman,
ÿ
select
[Settings] – [Bluetooth Settings] – [Bluetooth On/Off] – [Bluetooth
Off].
ˎ You can pair your Walkman and smartphone using the one-touch (NFC)
ÿ
function.
Troubleshooting
ˎ For detailed instructions, refer to the Help Guide installed on your computer
ÿ
If your Walkman does not function as expected, try the following steps to
or at the URL mentioned in the "About the manuals" section on the cover
resolve the issue.
page of this manual.
1
Find the symptoms of the issue in "Troubleshooting"
Answering/Hanging up a Call
in the Help Guide (HTML document), and try any
corrective actions listed.
You can answer and hang up a phone call to your smartphone.
2
Connect your Walkman to your computer to charge
the battery.
Answering a call
3
Press the RESET button with
Built-in microphone
a pen or paper clip, etc.
4
After resetting your
Walkman, press the
button to turn on the
Walkman.
[Settings]
Symptom & Remedy
Hanging up/Rejecting
Your Walkman cannot charge the battery or is not recognized on
your computer.
The USB cable (supplied) is not connected to a USB connector on your
ˎ
ÿ
Answering a call
computer properly. Disconnect the USB cable, and then reconnect it.
Press the
button while receiving a call.
ˎ
ÿ
Use the supplied USB cable.
ˎ
ÿ
When you use your Walkman for the first time, or if you have not used
To reject an incoming call, press the HOME•BACK button while receiving
the Walkman for a long time, it may take a few minutes to be
a call.
recognized by the computer. Check that the computer recognizes the
Walkman after you have connected it to the computer for about
¼ Hint
ÿ
10 minutes.
ˎ The microphone is built-in inside where the Sony logo is.
ÿ
Your Walkman does not operate or the power does not turn on.
ˎ Volume for calls and for music can be adjusted independently.
ÿ
ˎ When your Walkman is turned off automatically, the Bluetooth connection is
ˎ
ÿ
You cannot operate your Walkman while charging the battery. Wait
ÿ
until charging is complete.
disconnected and you cannot receive phone calls.
You cannot pair to a smartphone.
Hanging up a call
ˎ
ÿ
Your walkman works as a Bluetooth receiver and cannot connect to
Press the HOME•BACK button.
Bluetooth speakers or headphones as they also work as receivers.
ˎ
ÿ
If the support profiles are different, your Walkman and smartphone
cannot be paired. For more information, refer to the "Specification"
section on the Help Guide.
Precautions
Symptom & Remedy
Information on laws and trademarks
For information on laws, regulations and trademark rights, refer to "Important
You cannot connect using the Bluetooth function.
Information" contained in the supplied software. To read it, install the
ˎ
ÿ
Check that the Bluetooth function is activated on the smartphone and
supplied software on your computer.
your Walkman.
ˎ
ÿ
Check that [NWZ-M504] is shown as being connected on the
About the headphones
Bluetooth settings screen of the smartphone. If the Walkman is not
connected, tap [NWZ-M504].
ˎ Avoid playing the unit at so loud a volume that extended play might affect
ÿ
your hearing.
ˎ At a high volume outside sounds may become inaudible. Avoid listening to
ÿ
the unit in situations where hearing must not be impaired, for example,
RESET button
while driving or cycling.
ˎ As the headphones are of open-air design, sounds go out through the
ÿ
headphones. Remember not to disturb those close to you.
About the in-ear headphones
The earbuds seal your ears. Therefore, be aware that there is a risk of damage
to your ears or eardrums if strong pressure is applied to the earbuds or the
earbuds are suddenly removed from your ears. After use, be sure to take the
earbuds off your ears gently.
Design and specifications are subject to change without notice.
Advertisement
