Table of Contents
Advertisement
The different gearshifting stages (torque
reduction and clutch disengagement,
gear disengagement and engagement and
subsequent clutch re-engagement) are
actuated in sequence.
This results in extremely fast gearshifting,
which is reduced to 100 ms (measured as
"acceleration gap").
Environmental protection
The following chapter contains useful
advice for environmental protection.
Ferrari has designed and constructed a
vehicle using technologies, materials and
devices capable of reducing the harmful
impact on the environment to a minimum.
Using your vehicle respecting the
environment will be your contribution
towards environmental protection.
Fuel consumption as well as engine,
gearbox, brake and tyre wear mainly
depend on two factors:
- use of the vehicle
- driving style.
Both factors are influenced by the driver.
Use of the vehicle
- Avoid using the vehicle for short trips.
- Check that the tyre pressure is correct.
- Check the fuel consumption.
- Proper periodic maintenance will
contribute to preserving your vehicle in
full working order and to protecting the
environment.
We therefore advise you to respect
the service due dates indicated in the
"MAINTENANCE SCHEDULE".
Driving style
- Do not accelerate during the starting
procedure.
- Do not warm up the engine when the
vehicle is stationary.
- Drive prudently and keep a safety
distance suited to the driving speed.
- Avoid sharp and frequent accelerations.
- Turn off the engine if the vehicle is kept
stationary for long periods of time.
- Shift gears using only 2/3 of the speed
permitted for each gear.
Introduction
The vehicle is equipped with exhaust
gas control and monitoring systems,
WARNING
WARNING
which must always be fully efficient.
7
Advertisement
Table of Contents
