Panasonic KX-TG7513C Operating Instructions Manual page 48

TG75xxC(e).book Page 48 Monday, January 18, 2010 9:32 AM
Useful Information
Call Display/Talking Call Display
Problem
Caller information is not
displayed.
Caller information is
*1
displayed or announced
late.
Caller information is not
*1
announced.
I cannot dial the phone
number edited in the caller
list.
Time on the unit has
shifted.
48
*1
Cause/solution
L You must subscribe to Call Display service.
Contact your service provider/telephone company
for details.
L If your unit is connected to any additional
telephone equipment such as a Call Display box
or cordless telephone line jack, plug the unit
directly into the wall jack.
L If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base
unit and the telephone line jack. Contact your
DSL/ADSL provider for details.
L The name display service may not be available in
some areas. Contact your service provider/
telephone company for details.
L Other telephone equipment may be interfering
with this unit. Disconnect the other equipment and
try again.
L Depending on your service provider/telephone
company, the unit may display or announce the
caller's information at the 2nd ring or later.
L Move closer to the base unit.
L The handset or base unit's ringer volume is turned
off. Adjust it (page 17, 24).
L The Talking Call Display feature is turned off. Turn
it on (page 25).
L The number of rings for the answering system is
set to "2 rings" or "Toll saver". Select a
different setting (page 40).
L The phone number you dialed might have been
edited incorrectly (for example, the long distance
"1" or the area code is missing). Edit the phone
number with another pattern (page 35).
L Incorrect time information from incoming Call
Display changes the time. Set the time adjustment
to "Manual" (off) (page 24).