Audio And Video - D-Link DNS-722-4 User Manual

2-bay

Hide thumbs Also See for DNS-722-4:

Table of Contents

Section 3 - Configuration

This section will allow you to configure and modify the audio and video parameters for each camera.

Step 1: Select the camera which you would like to

modify in the camera list.

Step 2: NVR will display the parameters for the selected

camera. You can modify the information at this page.

Camera Name:

The name of the camera.

Video Format:

Select the video format the camera supports.

Frame rate:

Select the frame rate.

Resolution:

Select the resolution.

Quality:

Select the image quality.

Check the Enable Audio option for live view

Audio:

and recording

Go to Web:

Click to connect to the web page of the selected

network camera for advanced setup. For

example, motion detection should be configured

via the camera web interface to enable the NVR

to receive the trigger message.

Step 3: Click the Save Settings button.

Note: The system will adjust the frame rate automatically based on the maximum frame rate which that camera can support.

D-Link DNS-722-4/DNS-726-4 User Manual

Audio and Video

Table of Contents

Dns-726-4