Page 2
Steps: (1) Connect the Repeater to the Computer by using a network cable (network cable comes with the Repeater). Connect the AC Power Supply and turn ON the Repeater. (2) Define an IP Address for your Computer (Eg. 192.168.0.88). NOTE: The Repeater uses the default IP Address of 192.168.0.254. Go to [Control Panel] ...
Page 3
(3) Launch any web browser (Eg. Internet Explorer). Input the Repeater’s default IP Address as “192.168.0.254”. When prompted for Username/Password, input the default Username=”admin” and Password=”admin”. (4) Select [Quick Setup] and click on [Next]. Select the option as [Repeater]. Click on [Next]. (5) Select [Survey] and choose your Wireless Router SSID (auto-detected).
Page 4
(1) The above steps are based on the standard wireless settings. (2) For TP-LINK product and support-related matters, please visit http://www.tp-link.com/en/support/ Disclaimer: The external Wireless Adaptor (TL-WR702N) is NOT a Fuji Xerox product. Updated On 3 Apr 2013. Version 1.1...