Table of Contents
Advertisement
Making a recording cont.
If recording from a CD, recording will be started from the beginning of the currently playing track.
Each track on the CD will be recorded as a separate file on the media. You may also set up a
programme of tracks before recording if you wish (see the section of 'CD track programming').
4. In order to stop the recording press the Record button once more. Recording will stop and a
file will have been written to the storage media.
Files that have been written to the media are held in a folder called "RECORD". Recordings are
held in sub-folders according to the source used for the recording:
CDIN_xxx for recordings from CD
COP_xxxx for recordings from SD / USB
LINEIN for recordings from DAB, FM, Aux, etc.
The illustration shows the folders as they may appear on a PC running Windows with files in the
LINEIN folder being shown to the right. Other folders on the card were copied there from the PC.
Note:
The SD card / USB memory device should only be removed when recording is stopped.
Removing media while recording is in progress may corrupt data on the card leading to the loss
of files previously written.
The USB connection is primarily intended to be used to allow the DDR-47BT to play MP3 and
WMA files from solid-state flash memory devices. You may be able to play files which have been
stored on a USB hard disc drive (but the drive must have its own power supply). If you wish to
play files from another music player, then we recommend that this is connected to the Auxiliary
input socket - see the section of 'Auxiliary Input Socket'.
4
GB
AUX
33
Advertisement
Table of Contents
