Connecting The Video Out To Tv - Samsung HT-P10 Instruction Manual

1p~30p(P10)-GB

Connecting the Video Out to TV

Choose one of the three methods for connecting to a TV.
METHOD 1
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
METHOD 2
If you television is equipped with an SCART input, connect an Scart Jack (not supplied) from the
AV OUT jack on the back panel of the system to the SCART IN jack on your television.
VIDEO SELECT Function
Press and hold VIDEO SEL. button on the remote control for over 5 seconds.
•
•
•
METHOD 3
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
13
Downloaded From TheatreSystem-Manual.com Manuals
2/1/05 10:44 AM Page 16
Composite Video ............... Good Quality
Scart ............... Better Quality
"COMPOSITE" or "RGB" will appear in the display.
At this time, press the VIDEO SEL. button shortly to select between "COMPOSITE" and "RGB".
If Scart (RGB Input) is equipped for your TV, press VIDEO SEL. button to select RGB mode.
You can get a better picture quality by using Scart setting.
If Scart (RGB Input) is equipped for your TV, press VIDEO SEL. button to select COMPOSITE
mode.
Component (Progressive Scan) Video ............... Best Quality
•
When the Progressive scan mode is selected, the VIDEO and SCART outputs
Note
do not feed any signal.
METHOD 2
METHOD 1
METHOD 3