Panasonic Lumix DMC-GF2C Basic Operating Instructions Manual page 12

This touch panel is a type that detects pressure.
Touch the screen
To touch and release the touch panel.
Use this to perform tasks such as selecting
icons or images displayed on the touch panel.
•
When selecting features using the touch
panel, be sure to touch the center of the
desired icon.
Note
•
If you use a commercially available liquid crystal protection sheet,
please follow the instructions that accompany the sheet. (Some
liquid crystal protection sheets may impair visibility or operability.)
•
If a commercially available protection sheet is used, a little extra
pressure may be required if you notice that the touch panel is not
responsive.
•
Do not let the hand holding the camera accidently apply pressure
to the touch panel. Doing so may affect the touch panel operation.
•
Do not press on the LCD monitor with hard pointed tips, such as
ball point pens.
•
Do not operate with your fingernails.
•
Wipe the LCD monitor with dry soft cloth when it gets dirty with finger prints and others.
•
Do not scratch or press the LCD monitor too hard.
∫ About the Stylus pen
It is easier to use the stylus pen (supplied) for detailed operation or if it is hard to operate
with your fingers.
•
Only use the supplied
•
Do not place it where small children can reach.
12
VQT3E96 (ENG)
Touch Panel
stylus pen
.
Drag
A movement without releasing the touch panel.
This is used when performing tasks such as
moving to the next image by dragging
horizontally, or changing the range of the
displayed image.
This can also be used to perform tasks such as
switching the screen by operating the slide bar.